Bose Bluetooth Headset 10 User Guide page

®
SoundDock 10  
Bluetooth Dock  
Owners Guide | Brugervejledning | Bedienungsanleitung | Guía de usuario | Omistajan opas  
Notice d’utilisation | Felhasználói útmutató | Manuale di istruzioni | Gebruiksaanwijzing  
|
|
|
Podręcznik użytkownika | Bruksanvisningen |  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Safety information  
Please read this owner’s guide  
Please take the time to follow the instructions in this owner’s guide carefully. It will help you  
set up and operate your system properly and enjoy its advanced features. Please save this  
owner’s guide for future reference.  
WARNINGS:  
• To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture.  
• Do not expose this apparatus to dripping or splashing, and do not place objects filled with  
liquids, such as vases, on or near the apparatus. As with any electronic products, use care  
not to spill liquids into any part of the system. Liquids can cause a failure and/or a fire  
hazard.  
• Do not place any naked flame sources, such as lighted candles, on or near the apparatus.  
• Contains small parts that may be a choking hazard. Not suitable for children under age 3.  
Notes:  
• This Class B digital apparatus meets all requirements of the Canadian Interference-Causing  
Equipment Regulations (Canada only).  
• The product must be used indoors. It is neither designed nor tested for use outdoors, in  
recreation vehicles, or on boats.  
Bose Corporation hereby declares that this product is in compliance with the  
essential requirements and other relevant provisions of Directive 1995/5/CE  
(R&TTE directive) and other applicable Directives. The detailed Declaration of  
Temperature range for use: 0°-45°C (32°-113°F)  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
NOTICE  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses, and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause harmful interference to radio  
communications. However, this is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and on, you  
are encouraged to try to correct the interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment to an outlet on a different circuit than the one to which the  
receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
This device complies with FCC and Industry Canada RF radiation exposure limits set forth  
for general population. It must not be co-located or operating in conjunction with any other  
antenna or transmitter.  
This device complies with Part 15 of the FCC rules. Operation is subject to the following  
two conditions: (1) This device may not cause harmful interference, and (2) this device  
must accept any interference received, including interference that may cause undesired  
operation.  
Changes or modifications not expressly approved by the party responsible for  
compliance could void the user’s authority to operate this equipment.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Overview  
The Bose® SoundDock® 10 Bluetooth® dock adds Bluetooth wireless  
technology capability to your SoundDock 10 digital music system. After  
installing this accessory, you can listen to your stereo Bluetooth music  
phone with high-quality, room-filling sound. To experience the intended  
performance, your stereo Bluetooth music phone must support the  
Bluetooth Advanced Audio Distribution Profile (A2DP).  
Installing the Bluetooth dock  
1. Disconnect the SoundDock 10 system power cord from the AC outlet.  
2. Lift up the back edge of the universal dock adapter (A) and remove it  
from the dock. You may need to insert a thin non-metallic utensil into  
the slot to provide the required leverage to lift the back edge.  
B
C
A
3. Press the dock release button (B) on the right and lift up (C) the right  
side of the dock to remove it. There is a small indent on the button if  
you need to use a pen to press the button in far enough to fully release  
the dock.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
4. Slide the left end of the Bluetooth® dock into the dock opening (A).  
A
B
5. Press down on the right side of the dock until it locks in place (B).  
Making the first connection  
1. Plug the power cord of the SoundDock® 10 digital music system into  
an AC outlet.  
2. Wait until the Bluetooth light starts slowly flashing, meaning that the  
Bluetooth dock is in discoverable mode.  
NOTE: The dock stays in discoverable mode (up to 30 minutes with first-time use) until you  
connect your stereo Bluetooth music phone to it.  
Bluetooth light  
(flashing = discoverable mode)  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
3. Bring your Bluetooth® music phone close to the SoundDock® 10  
system.  
4. Turn on the Bluetooth feature in your music phone. For details on  
using this feature, refer to the owner’s guide for your phone.  
5. In the list of found Bluetooth devices, find “Bose SoundDock 10” and  
select it.  
6. If prompted, enter the Bose® SoundDock 10 system passkey: 0000.  
7. When your music phone confirms it is connected, check that the  
Bluetooth light stops flashing and remains on.  
NOTE: You can use the SoundDock 10 remote to control the connected music phone.  
If your stereo Bluetooth music phone becomes disconnected  
because it is out of range, the dock automatically tries to reconnect with it  
(the Bluetooth light flashes during reconnection). If the SoundDock 10  
system cannot restore a connection within five minutes, it turns off.  
To disconnect, press Off on the Bose SoundDock 10 remote, or use the  
disconnect command in your phone.  
To reconnect when your system is off, press any remote key except  
Off or AUX to turn on the system. The SoundDock 10 system then auto-  
matically tries to connect with the most recently connected phone.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Connecting with other stereo Bluetooth® music phones  
After making an initial connection, you can change the connection to  
another phone by activating the discoverable mode again. However, you  
can connect to only one phone at a time.  
1. Press and hold the Bluetooth button on the dock or the dock button  
on the remote control until the Bluetooth light starts flashing.  
Dock  
button  
Bluetooth  
button  
2. Follow Steps 3-7 on the previous page.  
For the purpose of automatic reconnection, the SoundDock® 10 system  
remembers the six most recently connected music phones.  
Controlling the volume  
Increase the volume of your stereo Bluetooth music phone to near  
maximum. Then use the Bose® SoundDock 10 remote to control the  
system volume.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Data transfer light  
Certain conditions may affect the capability of your phone to adequately  
transfer data to the Bluetooth® dock. This may affect the quality of the  
audio heard from your SoundDock® 10 system.  
The data transfer light on the dock tells you how well the Bluetooth dock is  
receiving data from your phone.  
Data transfer light:  
• On............................. Audio quality not affected  
• Slow blink ................. Audio quality may be affected  
(On longer than off)  
• Fast blink .................. Audio quality is likely to be  
(Equal on-off)  
affected  
NOTE: Some phones cannot transmit data fast enough to prevent the light from blinking.  
If the audio quality is affected:  
Move your phone closer to the system or to a different location.  
Move your phone away from any household device that generates  
electromagnetic radiation, such as a microwave oven, another Bluetooth  
device, or a wireless computer network router.  
Reduce the number of applications running on your phone.  
Disconnect your phone and connect again.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
If you experience difficulty with your Bluetooth® dock, use the following  
table to try to solve the problem. If the problem persists, see “Contacting  
customer service” on page 11.  
Problem What to do  
Cannot  
connect  
my phone  
to the  
• Make sure your SoundDock® 10 system is connected to AC power.  
• Make sure the Bluetooth dock is in discoverable mode (Bluetooth  
light is flashing). If not, press and hold the Bluetooth button on the  
dock until the Bluetooth light starts flashing.  
dock  
• Make sure the Bluetooth feature is turned on in your phone. For  
details, refer to the owner’s guide for your phone.  
• Move your phone closer to the SoundDock 10 system.  
updating your SoundDock 10 system.  
No sound • Make sure the SoundDock 10 system and your phone are turned on.  
• Make sure you have a Bluetooth connection (Bluetooth light is on).  
• Move your phone closer to the SoundDock 10 system.  
Turn up the phone volume as high as possible.  
Turn up the SoundDock 10 system volume.  
Sound is • Move your phone or SoundDock 10 system away from any device  
dropping  
out or  
breaking  
up  
that generates electromagnetic radiation, such another Bluetooth  
device, a microwave oven, or a wireless computer network router.  
• Remove any physical obstruction lying between your phone and the  
SoundDock 10 system.  
• Change the location of your phone and/or the SoundDock 10 system.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Problem What to do  
Poor  
sound  
quality  
• Move your phone closer to the system or to a different location.  
• Move your phone away from any household device that generates  
electromagnetic radiation, such as a microwave oven, another  
Bluetooth® device, or a wireless computer network router.  
• Reduce the number of applications running on your phone.  
• Increase the volume on your phone.  
Removing the Bluetooth dock  
To remove the Bluetooth dock so you can put the universal dock back in  
your system:  
1. Slide the release latch (A) to the right.  
A
B
2. Lift up the right side (B) of the Bluetooth dock to remove it.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Contacting customer service  
For questions about the SoundDock® 10 Bluetooth® dock, contact your  
local Bose dealer. To contact Bose directly, see the address list included  
Internet.  
Limited warranty  
Your SoundDock 10 Bluetooth dock is covered by a limited transferable  
warranty. Details of the limited warranty are provided on the product  
registration card that is included in the carton. Please refer to the card for  
instructions on how to register. Failure to register will not affect your  
limited warranty rights.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
English  
What you must do to obtain limited warranty service  
Return product, with proof of purchase from an authorized Bose dealer,  
using the following procedures:  
dealer to identify the location of the nearest authorized Bose® service  
facility.  
2. Contact the authorized service facility for specific return and shipping  
instructions.  
3. Label and ship the product, freight prepaid, to the address provided by  
the authorized service facility.  
4. Place any necessary return authorization number prominently on the  
outside of the carton.  
Cartons not bearing a return authorization number, where required, will  
be refused.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
SoundDock and the distinctive design of the SoundDock 10 system are registered trade-  
marks of Bose Corporation in the U.S. and other countries. All other marks are registered  
trademarks and trademarks of Bose Corporation.  
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,  
Inc., and any use of such marks by Bose Corporation is under license. Other trademarks  
and trade names are those of their respective owners.  
QD ID: B015404  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
©2009 Bose Corporation, The Mountain,  
Framingham, MA 01701-9168 USA  
AM324759 Rev.01  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Bose Home Theater System 525p 625p User Guide page
Bose Home Theater System V25 User Guide page
Bose Portable Speaker Computer Speakers User Guide page
Bose Stereo System wave music system ic 1 User Guide page
Bose Video Gaming Accessories VG917 KST User Guide page