Bose Speaker System 347205 1300 User Guide page

Solo

TV Sound System

Owner’s Guide | Brugervejledning | Bedienungsanleitung | Gebruikershandleiding

Guía del usuario | Käyttöohje | Notice d’utilisation | Manuale di istruzioni

Kezelési útmutató | Podręcznik użytkownika | Manual do Proprietário | Bruksanvisning

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Safety Information

Introduction

ank you…...........................................................................................................

Unpacking.............................................................................................................

System Setup

Step 1: Place the system..................................................................................

Step 2: Connect the Solo system to power..................................................

Step 3: Choose the type of audio cable to use............................................

Step 4: Plug the audio cable into the Solo system ....................................

Step 5: Plug the other end of the audio cable into your TV......................

Step 6: Place your TV on the Solo system. ..................................................

Step 7: Check your TV settings.......................................................................

Step 8: Check for sound ..................................................................................

Alternate Setup Connections

When to use an alternate connection ............................................................. 16

Connecting to a cable box audio output ........................................................ 16

Connecting to a TV headphones output ......................................................... 17

Connecting multiple devices to the Solo system.......................................... 18

Operation

Remote control .................................................................................................... 19

System status indicator..................................................................................... 19

Decreasing the bass............................................................................................ 20

Optional universal remote control................................................................... 20

Using a third-party remote................................................................................ 20

Care and Maintenance

Troubleshooting .................................................................................................. 21

Replacing the remote battery ........................................................................... 22

Cleaning................................................................................................................. 22

Customer service................................................................................................. 23

Limited warranty ................................................................................................. 23

Technical information ........................................................................................ 23

2 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Safety Information

Please read this guide

Please take the time to follow the instructions in this owner’s guide carefully. It will help you set up and operate your

system properly and enjoy its advanced features. Please save this guide for future reference.

All Bose products must be used in accordance with local, state, and federal regulations.

The lightning ﬂash with arrowhead symbol within an equilateral triangle alerts the user to the presence of

uninsulated, dangerous voltage within the system enclosure that may be of sufﬁcient magnitude to

constitute a risk of electric shock.

The exclamation point within an equilateral triangle, as marked on the system, is intended to alert the user

to the presence of important operating and maintenance instructions in this owner’s guide.

WARNING: This product contains magnetic material. Please contact your physician if you have any

questions on whether this might affect the operation of your implantable medical device.

WARNING: Contains small parts which may be a choking hazard. Not suitable for children under age 3.

WARNING:

•

Never place the equipment in an unstable location. The equipment may fall, causing serious personal

injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions

such as:

•

Using cabinets or stands recommended by the manufacturer of the equipment.

Only using furniture that can safely support the equipment.

Ensuring the equipment is not overhanging the edge of the supporting furniture.

Not placing the equipment on tall furniture (for example, cupboards or bookcases) without anchoring

both the furniture and the equipment to a suitable support.

•

Not standing the equipment on cloth or other materials placed between the equipment and supporting

furniture.

•

Educating children about the dangers of climbing on furniture to reach the equipment or its controls.

If you doubt your ability to safely mount your television or set up this product, contact a professional

installer for help.

WARNING: Allowing children to push, pull, or climb on a television connected to this equipment may

cause it to tip over, possibly resulting in personal injury or death. For added safety and stability, be sure to

secure the television using a suitable anti-tip device.

English - 3

Download from Www.Somanuals.com. All Manuals Search And Download.

Safety Information

WARNING:

•

To reduce the risk of ﬁre or electrical shock, do not expose the product to rain or moisture.

Do not expose this apparatus to dripping or splashing, and do not place objects ﬁlled with liquids, such

as vases, on or near the apparatus. As with any electronic products, use care not to spill liquids into any

part of the system. Liquids can cause a failure and/or a ﬁre hazard.

•

Do not place any naked ﬂame sources, such as lighted candles, on or near the apparatus.

WARNING:

•

Keep the remote control battery away from children. It may cause a ﬁre or chemical burn if mishandled.

Do not recharge, disassemble, heat above 212ºF (100ºC), or incinerate. Dispose of used batteries

promptly. Replace only with a battery of the correct type and model number.

•

Do not ingest battery, chemical burn hazard. The remote control supplied with this product contains a

coin/button cell battery. If the coin/button cell battery is swallowed it can cause severe internal burns

in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery

compartment does not close securely, stop using the product and keep it away from children. If you

think the battery may have been swallowed or placed inside any part of the body seek immediate

medical attention.

•

Danger of explosion if battery is incorrectly replaced. Replace only with an agency-approved (e.g. UL)

CR2032 or DL2032 3-volt lithium battery.

CAUTION: Make no modiﬁcations to the system or accessories. Unauthorized alterations may

compromise safety, regulatory compliance, and system performance, and may void the warranty.

Notes:

•

Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall

remain readily operable.

The product must be used indoors. It is neither designed nor tested for use outdoors, in recreation vehicles, or

on boats.

The product label is located on the bottom or the back of the product.

Please dispose of used batteries properly, following any local regulations.

Do not incinerate.

This product conforms to all applicable EU Directive requirements. The complete Declaration of

Conformity can be found at www.Bose.com/compliance.

Names and Contents of Toxic or Hazardous Substances or Elements

Toxic or Hazardous Substances and Elements

Part Name

Lead

(Pb)

Mercury Cadmium Hexavalent

Polybrominated

Biphenyl (PBB)

Polybrominated

diphenylether (PBDE)

(Hg)

(Cd)

(CR(VI))

PCBs

Metal parts

Plastic parts

Speakers

Cables

0: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit

requirement in SJ/T 11363-2006.

X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is

above the limit requirement in SJ/T 11363-2006.

4 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Safety Information

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s

8. instructions.

9. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

ampliﬁers) that produce heat.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and

the point where they exit from the apparatus.

11. Only use attachments/accessories speciﬁed by the manufacturer.

12. Unplug this apparatus during lightning storms or when unused for long periods of time.

13. Refer all servicing to qualiﬁed personnel. Servicing is required when the apparatus has been damaged in

a way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into

the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has

been dropped.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interfer-

ence in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful interference to radio communica-

tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by turning the equipment

off and on, you are encouraged to try to correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment to an outlet on a different circuit than the one to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Changes or modiﬁcations not expressly approved by Bose Corporation could void the user’s authority to operate

this equipment.

Complies with the Canadian ICES-003 Class B speciﬁcations.

Please complete and retain for your records

The serial and model number can be found on the bottom panel.

Serial number: _________________________________________________________________

Model number: ________________________________________________________________

Purchase date: ________________________________________________________________

We suggest you keep your receipt with this owner’s guide.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are

registered trademarks of Dolby Laboratories.

prior written permission.

English - 5

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

ank you…

Thank you for choosing the Bose Solo TV sound system for your home. This

stylish, unobtrusive speaker system is designed to ﬁt under most TVs with screens

up to 32 inches, and many TVs with screens up to 42 inches. It delivers superb

acoustic performance that will greatly enhance your TV viewing experience.

Unpacking

Carefully unpack the carton and conﬁrm that you have all the parts shown here:

Bose Solo TV sound system

Remote

Power cord

Optical digital audio cable

Analog stereo audio cable

(The appropriate power cord

for your region is included)

Coaxial digital audio cable

If any part of the product appears to be damaged, do not attempt to use it. Contact

your authorized Bose dealer immediately or call Bose Customer Service. Refer to

the contact list enclosed in the carton for contact information.

Be sure to save the carton and packing materials. They provide the safest means

for transporting or storing the product.

6 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

System Setup

Step 1: Place the system

A. Move your TV aside and turn it so you

can see the connection panel.

B. Place the Solo system where you had

your TV.

Placement guidelines:

• The Bose Solo system is designed to ﬁt

under TVs that weigh no more than 40 lb

(18 kg) and have bases no wider than 20"

(508 mm) and no deeper than 10¼" (260

mm). Many 42" and most 32" TVs and

smaller meet these requirements.

• The base of your TV should be centered on the top of the system and must

not hang over any of its edges.

• If the TV base is too large to ﬁt on top of the system, place the sound system

in another location such as on an open shelf under the TV, but keep it close to

your TV so the audio cable will reach. You also could mount your TV on the

wall above the system.

• If placing the sound system in a cabinet, or on a shelf, position the front of

the system as close as possible to the front edge of the shelf for optimum

audio performance.

Note: Placing the system in a corner, in a cabinet, or on a shelf may cause the

system audio to sound heavy or have a booming bass quality. To decrease

the bass, see “Decreasing the bass” on page 20.

CAUTIONS:

• DO NOT place a CRT type TV on this system. It is not designed for use with this

type of TV.

• Allowing the base of your TV to hang over any edge of this speaker system

increases the risk of the TV tipping, which may result in injury.

• If placing the sound system backed up to a wall, make sure there is a space of at

least 1" (2.5 cm) between the wall and the rear of the system.

• With any placement of this product, make sure the ventilation openings on the

rear panel are not blocked.

• If your TV comes with an anti-tip device, install it according to the manufacturer’s

instructions and adjust the tether as instructed after placing the TV on top of the

system. Installing an anti-tip device is recommended when using a TV with this

product. If your TV did not come with an anti-tip device, you can get one from

most retail TV suppliers.

English - 7

Download from Www.Somanuals.com. All Manuals Search And Download.

System Setup

Step 2: Connect the Solo system to power

A. Plug one end of the power cord into the AC input connector.

B. Plug the other end into a live AC power (mains) outlet.

A few moments after applying power, the system emits two tones indicating

that it is ready to use.

AC input connector

100-240V

50/60 Hz

50W

Note: Bose recommends using a safety agency-approved surge protector on all

electronic equipment. Voltage variations and spikes can damage electronic

components in any system.

8 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

System Setup

Step 3: Choose the type of audio cable to use

On the back of your TV, look for one of the following audio output connections and

locate the cable for the one you want to use. Refer to the unpacking diagram on

page 6.

Choose only one

Audio OUT connection

Remove cap

Optical digital audio

Coaxial digital audio

Analog stereo audio

• A digital audio output

that passes digital

data through a ﬁber

optic cable.

• A digital audio output

that passes digital

data through a 75-ohm

coaxial cable.

• The most common

type of audio output

where the left and right

channel are connected

separately.

• If available, use this

connection for best

audio performance.

• Use this connection if

an optical output is not • Use this connection if

available.

no digital audio outputs

are available.

Tip: If your TV does not have any audio outputs, you can use the audio outputs

on another device. For example, if a cable or satellite box is connected to

your TV, you can connect audio outputs from that device to the Solo system.

See “Alternate Setup Connections” on page 16 for other ways to connect

the Solo TV sound system.

English - 9

Download from Www.Somanuals.com. All Manuals Search And Download.

System Setup

Step 4: Plug the audio cable into the Solo system

Tip: If you selected the optical digital audio cable, see “Important instructions for

optical cable connections” on page 11.

A. Plug one end of the selected audio cable into the correct Audio IN connector

on the Solo system.

Solo system Audio IN

Make only one connection

Remove cap

B. If you wish, you can slide the cable behind the built-in cable clip.

(Optical cable shown only for example.)

Cable clip

Audio IN connectors

10 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

System Setup

Important instructions for optical cable connections

1. Remove the protective cap from both ends of the cable.

Remove cap

2. Hold the optical cable plug as shown . Align the plug with the Optical

connector and insert the plug carefully

Note: The connector has a hinged door that swings out of the way when

inserting the plug.

Hinged

door

CAUTION: Inserting the plug in the wrong orientation can damage the plug

and/or the connector.

3. Firmly push the plug into the connector until you hear or feel a click.

English - 11

Download from Www.Somanuals.com. All Manuals Search And Download.

System Setup

Step 5: Plug the other end of the audio cable into

your TV

A. Find the Audio OUT connections on your TV.

B. Plug the other end of the audio cable into the correct Audio OUT connector.

CAUTION: If using an optical digital audio cable, make sure you hold the plug in

the correct orientation for the Audio OUT connector on your TV. You may need to

rotate the plug differently than you did for the Solo system.

Optical audio cable

shown only for example

TV Audio OUT

12 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

System Setup

Step 6: Place your TV on the Solo system.

Place your TV on the Solo system, making sure the TV stand is centered on the

top of the system. Refer to “Placement guidelines:” on page 7.

CAUTION: Be sure to center the base of your TV on the top of this product.

CAUTIONS:

• DO NOT place a CRT type TV on this system. It is not designed for use with

this type of TV.