TM
L1 Model II System
TM
with ToneMatch port
Owner’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Svenska
Nederlands
Italiano
FSrvaennçsakias
NeEdsepralañnodl s
FDItreaulnitaçsnacoihs
DEDseapunatssñckohl
EDnagnlisskh
SAFETY INFORMATION
Please read this owner’s guide
Please take the time to follow the instructions in this owner’s guide carefully. It will help you set up and operate your
system properly and enjoy its advanced features. Please save this owner’s guide for future reference.
WARNING: To reduce the risk of fire or electrical shock, do not expose the system to rain or moisture.
WARNING: To reduce the risk of electric shock, do not disassemble this system unless you are qualified.
Refer servicing to qualified service personnel.
The lightning flash with arrowhead symbol within an equilateral triangle alerts the user to the presence
of uninsulated, dangerous voltage within the system enclosure that may be of sufficient magnitude to
constitute a risk of electrical shock.
The exclamation point within an equilateral triangle, as marked on the system, is intended to alert the user
to the presence of important operating and maintenance instructions in this owner’s guide.
CAUTION: This product shall be connected to a mains socket outlet with a protective earthing connection.
CAUTION: Make no modifications to the system or accessories. Unauthorized alterations may compromise safety,
regulatory compliance, and system performance.
CAUTION: No naked flame sources, such as lighted candles, should be placed on the apparatus.
CAUTION: Where the mains plug is used as the disconnect device, such disconnect device shall remain readily
operable.
Note: The product must be used indoors. It is neither designed nor tested for use outdoors, in recreation vehicles, or on
boats.
This product conforms to the EMC Directive 89/336/EEC and to the Low Voltage Directive 73/23/EEC.
©2007 Bose Corporation. No part of this work may be reproduced, modified, distributed, or otherwise used without prior written
permission.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDnagnlisskh
DEDseapunatssñckohl
FDItreaulnitaçsnacoihs
NeEdsepralañnodl s
FSrvaennçsakias
Italiano
Nederlands
Svenska
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
15. To prevent risk of fire or electric shock, avoid
overloading wall outlets, extension cords, or
integral convenience receptacles.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instruc-
tions.
16. Do not let objects or liquids enter the product –
as they may touch dangerous voltage points or short-
circuit parts that could result in a fire or electric shock.
8. Do not install near any heat sources, such as
radiators, heat registers, stoves, or other appa-
ratus (including amplifiers) that produce heat.
17. See product enclosure bottom for safety-related
markings.
9. Do not defeat the safety purpose of the polar-
ized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A
grounding-type plug has two blades and a third
grounding prong. The wider blade or third prong
is provided for your safety. If the provided plug
does not fit into your outlet, consult an electri-
cian for replacement of the obsolete outlet.
18. Use proper power sources – Plug the product into
a proper power source, as described in the operating
instructions or as marked on the product.
19. Apparatus shall not be exposed to dripping or
splashing, and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
10. Protect the power cord from being walked on or
pinched, particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
Information about products that
generate electrical noise
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interfer-
ence in a commercial environment. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference,
in which case the user will be required to correct the
interference at his own expense.
11. Only use attachments/accessories specified by
the manufacturer.
12. Use only with the cart, stand, tripod,
bracket, or table specified by the man-
ufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
This product complies with the Canadian ICES-003
Class A specifications.
Download from Www.Somanuals.com. All Manuals Search And Download.
Svenska
Nederlands
Italiano
FSrvaennçsakias
NeEdsepralañnodl s
FDItreaulnitaçsnacoihs
DEDseapunatssñckohl
EDnagnlisskh
SIKKERHEDSINFORMATION
Læs denne brugervejledning
Tag dig tid til at følge denne brugervejledning omhyggeligt. Hermed får du hjælp til at installere og betjene systemet
korrekt, så du kan drage nytte af alle dets avancerede funktioner. Gem din brugervejledning til fremtidig brug.
ADVARSEL: Systemet må ikke udsættes for regn eller fugtighed af hensyn til risikoen for brand eller elektrisk stød.
ADVARSEL: Skil ikke systemet ad, med mindre du er kvalificeret hertil af hensyn til risikoen for elektrisk stød. Overlad ser-
viceringen til kvalificeret servicepersonale. De FORSIGTIG-mærker, der er vist her, er placeret på systemets kabinetter.
En ligebenet trekant med et lyn med pilehoved gør brugeren opmærksom på, at der i systemets kabinet kan
være uisoleret farlig spænding, der kan være så kraftig, at der er risiko for elektrisk stød.
En ligebenet trekant med et udråbstegn, som markeret på systemet, skal henlede brugerens opmærksomhed
på vigtige betjenings- og vedligeholdelsesinstruktioner i denne brugervejledning.
FORSIGTIG: Dette produkt skal tilsluttes en stikkontakt med en beskyttende jordforbindelse.
FORSIGTIG: Undlad at foretage ændringer i systemet eller tilbehøret. Uautoriserede ændringer kan sætte sikkerheden,
overholdelse af lovbestemmelser samt systemets ydeevne over styr.
FORSIGTIG: Der må ikke anbringes åben ild, f.eks. tændte stearinlys, på apparatet.
FORSIGTIG: Hvis netstikket anvendes som afbryder, skal denne afbryder være let at betjene.
Bemærk!: Dette produkt skal anvendes inden døre. Det er hverken designet eller testet til udendørs brug i fritidskøretøjer
eller i lystbåde.
Dette produkt opfylder EØF-direktiv 89/336/EEC og Lavspændings-direktiv 73/23/EEC. Den fulde overens-
©2007 Bose Corporation. Gengivelse, ændring, distribution eller anden brug af dette dokument eller dele heraf er forbudt uden forudgående skriftlig
tilladelse.
Venice_Safety_DAN.fm
1/07
Download from Www.Somanuals.com. All Manuals Search And Download.
Svenska
Nederlands
Italiano
FSrvaennçsakias
NeEdsepralañnodl s
FDItreaulnitaçsnacoihs
DEDseapunatssñckohl
EDnagnlisskh
SICHERHEITSHINWEISE
Bitte lesen Sie diese Bedienungsanleitung aufmerksam durch.
Beachten Sie sorgfältig die Hinweise in dieser Anleitung. Sie unterstützt Sie beim Aufbau und ordnungsgemäßen
Betrieb des Systems und seiner modernen Funktionen. Bewahren Sie die Bedienungsanleitung zum späteren
Nachschlagen auf.
WARNUNG: Um Brände und Stromschläge zu vermeiden, darf dieses Gerät weder Regen noch Feuchtigkeit aus-
gesetzt werden.
WARNUNG: Um Stromschläge zu vermeiden, darf dieses Gerät nur von qualifiziertem Personal zerlegt werden.
Wenden Sie sich bei allen Reparatur- und Wartungsarbeiten nur an qualifiziertes Kundendienstpersonal.
Das mit einer Pfeilspitze versehene Blitzsymbol in einem gleichseitigen Dreieck weist den Benutzer auf nicht
isolierte, gefährliche elektrische Spannung innerhalb des Systemgehäuses hin. Es besteht die Gefahr von
Stromschlägen!
Das Ausrufezeichen innerhalb des gleichseitigen Dreiecks macht den Anwender auf wichtige Bedienungs-
und Wartungsanweisungen in diesem Benutzerhandbuch aufmerksam.
ACHTUNG: Dieses Produkt muss an eine Steckdose mit Erdungsschutz angeschlossen werden.
ACHTUNG: Nehmen Sie keine Veränderungen am System oder am Zubehör vor. Nicht autorisierte Veränderungen
können die Sicherheit, die Erfüllung von Richtlinien und die Systemleistung beeinträchtigen.
ACHTUNG: Stellen Sie keine offenen Flammen wie brennende Kerzen auf das Gerät.
ACHTUNG: Falls zur Trennung des Geräts von der Stromversorgung der Netzstecker verwendet wird, muss sicherges-
tellt sein, dass Sie jederzeit auf den Stecker zugreifen können.
Hinweis: Das Gerät ist nicht zum Einsatz im Freien geeignet. Verwenden Sie das Gerät nur innerhalb von Gebäuden
und nicht in Campingfahrzeugen, auf Booten o. ä.
Das Gerät entspricht der EMV-Richtlinie 89/336/EWG und der Niederspannungs-Richtlinie 73/23/EWG. Die voll-
©2007 Bose Corporation. Dieses Dokument darf ohne vorherige schriftliche Genehmigung weder ganz noch teilweise
reproduziert, verändert, vertrieben oder auf andere Weise verwendet werden.
Venice_Safety_DEU.fm
1/07
Download from Www.Somanuals.com. All Manuals Search And Download.
Svenska
Nederlands
Italiano
FSrvaennçsakias
NeEdsepralañnodl s
FDItreaulnitaçsnacoihs
DEDseapunatssñckohl
EDnagnlisskh
INFORMACIÓN DE SEGURIDAD
Lea esta guía del usuario
Dedique el tiempo que sea necesario para seguir el contenido de esta guía del usuario cuidadosamente. Le ayu-
dará a configurar y utilizar correctamente el sistema y a disfrutar de todas sus funciones avanzadas. Guarde la guía
del usuario para utilizarla como material de referencia en el futuro.
ADVERTENCIA: Con el fin de reducir el riesgo de descargas eléctricas, no exponga el sistema a la lluvia o la
humedad.
ADVERTENCIA: Para reducir el riesgo de descargas eléctricas, no desmonte el sistema si no es usted un técnico
cualificado. Las reparaciones debe llevarlas a cabo personal cualificado.
El símbolo de un relámpago con una flecha dentro de un triángulo equilátero indica al usuario que la car-
casa del sistema puede contener elementos de voltaje sin aislar de magnitud suficiente para constituir un
riesgo de descarga eléctrica.
El signo de exclamación dentro de un triángulo equilátero avisa al usuario de la existencia de instrucciones
de funcionamiento y de mantenimiento importantes en esta guía del usuario.
PRECAUCIÓN: Este producto se debe conectar a una toma de la red eléctrica con una conexión de tierra que sirva de
protección.
PRECAUCIÓN: No realice modificaciones en el sistema o los accesorios. Las alteraciones no autorizadas pueden
comprometer aspectos de seguridad, cumplimiento normativo y rendimiento del sistema.
PRECAUCIÓN: No coloque sobre el aparato ninguna llama viva, como, por ejemplo, una vela.
PRECAUCIÓN: Si se utiliza la clavija de red o el conector del aparato como dispositivo de desconexión, deberá poder
utilizarse fácilmente.
Nota: Este producto debe utilizarse en espacios interiores. No está diseñado ni se ha probado para uso al aire libre o
en embarcaciones.
Este producto cumple con la directiva sobre compatibilidad electromagnética 89/336/EEC y la directiva sobre
compliance/index.html.
©2007 Bose Corporation. Ninguna parte de esta obra puede reproducirse, modificarse, distribuirse o usarse de ninguna otra
manera sin consentimiento previo por escrito.
Venice_Safety_SPA.fm
1/07
Download from Www.Somanuals.com. All Manuals Search And Download.
Svenska
Nederlands
Italiano
FSrvaennçsakias
NeEdsepralañnodl s
FDItreaulnitaçsnacoihs
DEDseapunatssñckohl
EDnagnlisskh
INFORMATIONS DE SÉCURITÉ
Veuillez lire cette notice d’utilisation
Prenez le temps de lire attentivement les instructions de cette notice d’utilisation. Elles vous seront précieuses pour installer et utiliser correctement
votre système et vous aideront à tirer le meilleur parti de sa technologie. Conservez cette notice d’utilisation pour référence ultérieure.
AVERTISSEMENT : Afin de limiter les risques d’incendie ou d’électrocution, n’exposez pas l’appareil à la pluie ou à l’humidité.
AVERTISSEMENT : Afin de limiter les risques d’électrocution, ne démontez pas ce système à moins de disposer des qualifications requi-
ses. Adressez-vous à un réparateur qualifié. Les marquages de SÉCURITÉ présentés sur cette page sont situés sur les boîtiers de votre
système.
Le symbole représentant un éclair avec une flèche à l’intérieur d’un triangle équilatéral est utilisé pour prévenir l’utilisateur de la
présence d’une tension électrique dangereuse non isolée à l’intérieur de l’appareil. Cette tension est d’un niveau suffisamment
élevé pour représenter un risque d’électrocution.
Le symbole représentant un point d’exclamation à l’intérieur d’un triangle équilatéral, tel qu’il figure sur le système, signale à
l’utilisateur la présence d’instructions importantes relatives au fonctionnement et à l’entretien de l’appareil dans cette notice
d’installation.
ATTENTION : Cet appareil doit être connecté à une prise électrique dotée d’une mise à la terre.
ATTENTION : N’apportez aucune modification au système ou aux accessoires. Toute modification non autorisée peut
compromettre votre sécurité, le respect des réglementations et les performances.
ATTENTION : Ne placez jamais d’objets enflammés, tels que des bougies allumées, sur l’appareil.
ATTENTION : Lorsque la fiche d’alimentation est utilisée comme dispositif de débranchement de l’appareil, elle doit rester facilement
accessible
Remarque :Cet appareil doit être utilisé à l'intérieur. Il n’a pas été conçu ni testé pour une utilisation en extérieur, dans des
véhicules ou sur des bateaux.
Ce produit est conforme à la directive CEM 89/336/CEE et à la directive sur les basses tensions 73/23/CEE.
La déclaration complète de conformité est disponible sur le site Web www.bose.com/static/compliance/
index.html.
©2007 Bose Corporation. Toute reproduction, modification, distribution ou autre utilisation, même partielle, de ce document est interdite sans autorisa-
tion écrite préalable.
Venice_Safety_FRA.fm
1/07
Download from Www.Somanuals.com. All Manuals Search And Download.
Svenska
Nederlands
Italiano
FSrvaennçsakias
NeEdsepralañnodl s
FDItreaulnitaçsnacoihs
DEDseapunatssñckohl
EDnagnlisskh
INFORMAZIONI SULLA SICUREZZA
Legga questa guida per l’utente
Segua scrupolosamente le istruzioni riportate in questa guida, che consentono di configurare e utilizzare correttamente il sistema e sfrut-
tare appieno tutte le funzionalità avanzate di cui dispone. Conservi la guida per l’utente quale riferimento per il futuro.
AVVERTENZA: per ridurre il rischio di incendio o di scosse elettriche, il sistema non deve essere esposto a pioggia o umidità.
AVVERTENZA: per ridurre il rischio di scosse elettriche, il sistema deve essere smontato solo da una persona qualificata. Si affidi a person-
ale qualificato per tutti gli interventi di assistenza. Questi segnali di ATTENZIONE sono presenti sulle superfici esterna del sistema.
Il simbolo del fulmine con la punta a freccia all’interno di un triangolo equilatero mette in guardia l’utente contro tensioni perico-
lose non isolate all’interno del telaio del sistema, di entità tale da presentare un potenziale pericolo di scossa
elettrica.
Il simbolo del punto esclamativo racchiuso all’interno di un triangolo equilatero, che appare sul sistema, rimanda l’utente alla
lettura delle importanti istruzioni di uso e manutenzione contenute in questo manuale.
ATTENZIONE: questo prodotto deve essere collegato a una presa di corrente dotata di un impianto protettivo di messa
a terra.
ATTENZIONE: non apportare modifiche al sistema o agli accessori, in quanto le modifiche non autorizzate possono
compromettere la sicurezza, la conformità alle norme e le prestazioni del sistema.
ATTENZIONE: non collochi sull’apparecchio candele accese o altre sorgenti di fiamme libere.
ATTENZIONE: a spina dell’alimentazione deve essere raggiungibile facilmente e rapidamente se è utilizzata come dispositivo di spegnimento.
Nota: questo prodotto è destinato all'utilizzo in ambienti interni. Non è stato progettato né collaudato per l'uso in ambienti
esterni, camper o imbarcazioni.
Questo prodotto è conforme alla Direttiva 89/336/CEE sulla compatibilità elettromagnetica e alla Direttiva
73/23/CEE sui dispositivi a bassa tensione. La dichiarazione di conformità completa è disponibile all'indi-
© 2007 Bose Corporation. Nessuna parte di questo documento può essere riprodotta, modificata, distribuita o usata in altro modo senza previa autor-
izzazione scritta della Bose Corporation o della Bose S.p.A.
Venice_Safety_ITA.fm
1/07
Download from Www.Somanuals.com. All Manuals Search And Download.
Svenska
Nederlands
Italiano
FSrvaennçsakias
NeEdsepralañnodl s
FDItreaulnitaçsnacoihs
DEDseapunatssñckohl
EDnagnlisskh
VEILIGHEIDSINFORMATIE
De gebruikershandleiding doorlezen
Neem a.u.b. de tijd om de instructies in deze gebruikershandleiding zorgvuldig door te nemen. Op deze manier kunt u uw systeem correct
installeren en bedienen en genieten van alle geavanceerde functies. Bewaar uw gebruikershandleiding voor toekomstig gebruik.
WAARSCHUWING: Ter voorkoming van brand en elektrische schokken mag het systeem niet aan regen of vocht worden blootgesteld.
WAARSCHUWING: Demonteer dit systeem niet tenzij u hiervoor gekwalificeerd bent om de kans op elektrische schokken te vermijden.
Laat onderhoud en service over aan gekwalificeerd onderhoudspersoneel. De waarschuwingen die hier worden getoond bevinden zich op de
behuizingen van uw systeem.
De bliksemschicht met een pijl in een driehoek waarschuwt de gebruiker voor de aanwezigheid van gevaarlijke niet-geïsoleerde
spanning in de systeembehuizing, waardoor er kans op elektrische schokken bestaat.
Het uitroepteken in de driehoek dat is afgebeeld op het systeem maakt de gebruiker attent op belangrijke bedienings- en onder-
houdsinstructies in deze gebruikershandleiding.
WAARSCHUWING: Dit product moet worden aangesloten op een geaard stopcontact.
WAARSCHUWING: Voer zelf geen wijzigingen door aan het systeem of de accessories. Ongeoorloofde wijzigingen
kunnen de veiligheid, de naleving van reglementen en de prestaties van het systeem in gevaar brengen.
WAARSCHUWING: Er mogen geen open vlammen zoals aangestoken kaarsen op het apparaat worden geplaatst.
WAARSCHUWING: Daar waar de netstekker als uitschakelingsapparaat wordt gebruikt, dient een dergelijk apparaat gereed te zijn voor
bediening.
Opmerking: Dit product moet binnenshuis worden gebruikt. Het is niet ontwikkeld of getest voor gebruik buitenshuis, in
recreatievoertuigen of op boten.
Dit product voldoet aan de EMC-richtlijn 89/336/EEC en bepalingen van de richtlijn inzake lage spanning
index.html.
©2007 Bose Corporation. Geen enkel deel van deze uitgave mag gereproduceerd, gemodificeerd, gedistribueerd of op andere wijze worden
gebruikt zonder schriftelijke toestemming vooraf.
Venice_Safety_NED.fm
1/07
Download from Www.Somanuals.com. All Manuals Search And Download.
Svenska
Nederlands
Italiano
FSrvaennçsakias
NeEdsepralañnodl s
FDItreaulnitaçsnacoihs
DEDseapunatssñckohl
EDnagnlisskh
SÄKERHETSINFORMATION
Läs denna användarhandbok
Ta dig tid att göra som det står i användarhandboken. Den hjälper dig att installera och använda systemet på rätt sätt
och utnyttja de avancerade funktionerna. Spara användarhandboken för framtida bruk.
VARNING: Minska risken för brand eller elektriska stötar genom att inte utsätta systemet för regn eller fukt.
VARNING: Minska risken för brand eller elektriska stötar genom att inte montera isär systemet såvida du inte är kvalifi-
cerad för detta. Låt underhåll utföras av kvalificerad servicepersonal. VARNINGS-märkena som visas här finns på syste-
mets höljen.
Blixten med pilhuvudssymbolen i en likbent triangel uppmärksammar användaren på att det finns oisolerad
farlig spänning i systemet som kan vara tillräckligt stark för att innebära risk för elektriska stötar.
Utropstecknet i en triangel som finns på systemet är avsedd att uppmärksamma användaren på att det finns
viktiga användnings- och underhållsanvisningar i den här användarhandboken.
VARNING: Den här produkten ska anslutas till ett skyddsjordat eluttag.
VARNING: Ändra inte systemet eller tillbehören på något sätt. Otillåtna ändringar kan äventyra säkerheten, efterlevandet
av bestämmelser samt systemets prestanda.
VARNING: Ingen öppen eld, t.ex. tända stearinljus, får placeras på apparaten.
VARNING: När huvuduttaget används för frånkoppling måste frånkopplingen fortfarande kunna användas.
Obs!: Produkten får endast användas inomhus. Den är varken utformad eller testad för användning utomhus, i fritidsfor-
don eller marina miljöer.
Denna produkt uppfyller EMC-föreskriften i EU-direktiv 89/336/EEC och lågspänningsföreskriften i EU-
direktiv 73/23/EEC. Den kompletta konformitetsdeklarationen finns på www.bose.com/static/compliance/
index.html.
©2007 Bose Corporation. Ingen del av denna publikation får reproduceras, modifieras, distribueras eller på annat sätt användas utan föregående
skriftligt medgivande.
Venice_Safety_SVE.fm
1/07
Download from Www.Somanuals.com. All Manuals Search And Download.
EDnagnlisskh
DEDseapunatssñckohl
FDItreaulnitaçsnacoihs
NeEdsepralañnodl s
FSrvaennçsakias
Italiano
Nederlands
Svenska
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Features and benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Product overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connections and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
4
Parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting up the L1 model II power stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Assembling the L1 model II Cylindrical Radiator loudspeaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting to AC power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting the B1 bass module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
TM
Adding a T1 ToneMatch audio engine (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Adding a second B1 bass module (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Adding a PackLite power amplifier model A1 (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Setting the analog input level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Using a T1 ToneMatch audio engine and an analog input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
User scenarios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Single musician . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Multiple musicians . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Full band . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
DJ events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Caring for your product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Getting service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Limited Warranty and Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Mechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Audio Input/Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Svenska
Nederlands
Italiano
FSrvaennçsakias
NeEdsepralañnodl s
FDItreaulnitaçsnacoihs
DEDseapunatssñckohl
EDnagnlisskh
INTRODUCTION
Welcome
Thank you for purchasing the Bose® L1TM model II system with ToneMatchTM port. Based on a
revolutionary new technology, this system brings the benefits of an intimate acoustic concert
to amplified performance.
This owner’s guide provides detailed setup and operating instructions for your L1TM model II
system and explains how to connect equipment to it.
For additional information on using this system, including tips, techniques, and frequently
Features and benefits
• You control the sound – Just as in an unamplified performance, you control the sound.
You will no longer wonder how you sound to your fellow musicians or to your audience
because you will hear what they hear.
• Quick and easy setup – The L1 model II system is easy to carry and can be set up in min-
utes, not hours. This frees you from the time-consuming and often frustrating effort
required to properly set up conventional sound equipment.
• Dramatically improved performance – Compared to using conventional equipment,
performance and enjoyment dramatically improve because the struggle to hear yourself
and the other musicians is diminished.
• Creates excitement and emotion – Enhanced performance of the musicians creates the
kind of excitement and emotion that is valued by music lovers.
• You hear what the audience hears – For the first time, musicians hear what their
audiences hear and thus, are less likely to play at uncomfortable sound levels.
• The music is naturally dynamic – The softest to the most intense passages can be
heard and enjoyed.
• Improves your appearance – There is less equipment on the stage and more room.
• Sound reproduction unlike before – Audience members report that the clarity and
excitement that come from hearing the accurate reproduction of sound from each
instrument, and from hearing the sound of each instrument in its position on stage
(as opposed to mono or even stereo mix of all instruments), is unlike anything they have
heard before in an amplified performance.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
EDnagnlisskh
DEDseapunatssñckohl
FDItreaulnitaçsnacoihs
NeEdsepralañnodl s
FSrvaennçsakias
Italiano
Nederlands
Svenska
INTRODUCTION
Product overview
The L1TM model II system – with ToneMatchTM port consists of the L1 model II power stand,
the L1 model II Cylindrical Radiator® loudspeaker, and a B1 bass module. The L1 model II
system comes with a padded carrying bag for each of its parts.
To expand your system and enhance performance, you can add:
• A second B1 bass module for bass guitar, kick drum, or organ. Each power stand can
power up to two B1 bass modules.
• A T1 ToneMatch audio engine for digital signal processing, additional inputs and user-inter-
face control.
• A PackLite® power amplifier model A1 for adding up to two more B1 bass modules to your
system.
For a complete list of optional equipment and accessories, please visit:
Figure 1
Optional equipment
L1 model II system with ToneMatch port
L1 model II system and
optional equipment
T1 ToneMatch
audio engine
Additional
B1 bass
module
L1 model II Cylindrical
Radiator® loudspeaker
PackLite
power
amplifier
model A1
B1 bass
module
L1 model II
power stand
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Svenska
Nederlands
Italiano
FSrvaennçsakias
NeEdsepralañnodl s
FDItreaulnitaçsnacoihs
DEDseapunatssñckohl
EDnagnlisskh
INTRODUCTION
Connections and controls
The top panel of the power stand provides system connectors and controls (Figure 2).
Figure 2
Power stand top panel
Power/Fault LED
Indicates power status.
Blue = system on
Power switch
Switches the system
on and off.
Red = system fault
Bass Module Out
Bass output signal for driving one
or two B1 bass modules. Accepts
a 4-wire bass module cable.
AC Mains
AC power input
connector.
Trim
Adjusts the level of the
analog input signal.
Bass - Line Out
ToneMatchTM port
Post-DSP bass signal output.
Accepts a ¼" TRS phone cable.
Used to drive a PackLite® power
amplifier.
Digital audio and power con-
nection for the optional T1
ToneMatch audio engine.
Accepts the included
ToneMatch cable.
Analog Input
A line-level analog input. Accepts
a ¼" TRS phone cable. Used for
an instrument or other audio
source.
Signal/Clip LED
Indicates status of the analog input signal.
Green = normal input
Yellow = input approaching clipping
Red = input clipping
6
Venice_Intro.fm
1/07
Download from Www.Somanuals.com. All Manuals Search And Download.
EDnagnlisskh
DEDseapunatssñckohl
FDItreaulnitaçsnacoihs
NeEdsepralañnodl s
FSrvaennçsakias
Italiano
Nederlands
Svenska
SYSTEM SETUP
Parts list
The L1TM model II system is shipped in three cartons. Carefully unpack the cartons and check
that you have all the items listed on this page.
WARNING: To avoid danger of suffocation, keep the plastic bags out of the reach of children.
Power stand carton
L1 model II power stand
Cylindrical Radiator® carton
B1 bass module carton
L1 model II
B1 bass module
Cylindrical Radiator® loudspeaker
Bottom
Carrying bag
Carrying case
Top
AC power cord
Carrying bags
Bass module cable (blue 4-wire)
B1 bass module owner’s guide
Demonstration CD
Quick setup guide
Owner’s guide
TM
L1 Model II System
TM
with ToneMatch port
Owner’s Guide
B1
Bass Module
Installation Guide
Product registration card
Serial numbers and product registration
Now is a good time to record the serial numbers of your system here and on your product
(800) 905-1044. Failure to do so will not affect your warranty rights.
L1 model II power stand _______________________________________________________
L1 model II Cylindrical Radiator® loudspeaker _____________________________________
B1 bass module ______________________________________________________________
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Svenska
Nederlands
Italiano
FSrvaennçsakias
NeEdsepralañnodl s
FDItreaulnitaçsnacoihs
DEDseapunatssñckohl
EDnagnlisskh
SYSTEM SETUP
Positioning your system
Placing the power stand in the right location is an important part of setting up this product.
Determining the best location for your performance depends on several things.
• Size of staging area
• Number of performers
• Shared system (adding a T1 ToneMatchTM audio engine and multiple instruments)
The following guidelines should get you started in setting up for a concert or show.
• Set up your system in the rear area of the performance stage.
• If possible, position your system behind the performer(s).
• If you are part of a group, avoid crowding together on stage. Allow some distance,
ideally 7-8 feet (2.1-2.4 m), between you and the L1TM model II system and another
performer. This allows the sound to wrap around performers and reflect off adjacent
surfaces of the room, creating a more pleasing room-filling sound.
Figure 3
Placement
recommendations
3 ft
(0.9 m)
3 ft
(0.9 m)
3 ft
(0.9 m)
Good
3 ft
(0.9 m)
3 ft
(0.9 m)
5 ft
(1.5 m)
5 ft
(1.5 m)
5 ft
(1.5 m)
Better
5 ft
(1.5 m)
5 ft
(1.5 m)
7-8 ft
(2.1-2.4 m)
7-8 ft
(2.1-2.4 m)
7-8 ft
(2.1-2.4 m)
Best
7-8 ft
(2.1-2.4 m)
7-8 ft
(2.1-2.4 m)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
EDnagnlisskh
DEDseapunatssñckohl
FDItreaulnitaçsnacoihs
NeEdsepralañnodl s
FSrvaennçsakias
Italiano
Nederlands
Svenska
SYSTEM SETUP
Setting up the L1TM model II power stand
fully open before you can plug the L1TM bottom section into the power stand.
2. Lay the power stand flat on the floor in the desired position (Figure 4B).
Figure 4
B
A
Putting the power stand on
the floor
Socket for
L1 bottom
WARNING: DO NOT move the completely assembled system as a unit. This could result in
personal injury and/or damage to the product. Position the power stand on the floor in the
chosen location before assembling the system.
This procedure tells you how to set up the loudspeaker sections in the power stand. If you
plan to mount the T1 ToneMatchTM audio engine on the L1 model II system, see “Adding a T1
2. Align the bayonet on the L1 top with the channel on the back of the L1 bottom, and lower
the L1 top onto the L1 bottom until it is flush (Figure 5B).
Figure 5
B
A
Bayonet
Setting up the L1 model II
Cylindrical Radiator® loud-
speaker top and bottom
L1 top
Channel
L1 bottom
Front of
system
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Svenska
Nederlands
Italiano
FSrvaennçsakias
NeEdsepralañnodl s
FDItreaulnitaçsnacoihs
DEDseapunatssñckohl
EDnagnlisskh
SYSTEM SETUP
Connecting to AC power
1. Make sure the power switch is off.
2. Plug one end of the AC power cord into the AC Mains connector on the power stand.
3. Plug the other end into a live AC (mains) receptacle (Figure 6).
Figure 6
CAUTION: DO NOT block or cover
the handle opening, which is part of
the ventilation system. Doing so can
cause the L1TM model II system to
overheat, switch to a thermal protec-
tion mode, and temporarily turn off.
Power connections
Power switch
AC Mains
CAUTION: Bose recommends using a quality surge suppressor on all electronic equipment.
Voltage variations and spikes can damage electronic components in any system. A quality
suppressor, which can eliminate the vast majority of failures attributed to surges, may be pur-
chased at electronics stores.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
EDnagnlisskh
DEDseapunatssñckohl
FDItreaulnitaçsnacoihs
NeEdsepralañnodl s
FSrvaennçsakias
Italiano
Nederlands
Svenska
SYSTEM SETUP
Connecting the B1 bass module
You can place the B1 bass module either vertically or horizontally on the floor. It fits neatly
bewteen the legs of the power stand.
1. Plug one end of the B1 bass module cable into one of the B1 connectors. Rotate the plug
clockwise to lock it in place. You should hear a soft click as it locks.
2. Plug the other end of the cable into the Bass Module Out connector on the power
stand. Rotate the plug clockwise to lock it.
Note: To disconnect a B1 cable, slide back the metal tab on the body of the plug, rotate the plug
counterclockwise, and pull it out of the connector.
Figure 7
B1 bass module
B1 bass
module
cable
Bass Module Out
CAUTIONS:
• DO NOT connect a B1 bass module to two power stands at the same time.
• DO NOT connect any bass module other than the B1 to the power stand.
• DO NOT substitute the supplied cable with a 2-wire speaker cable. Use only the supplied
B1 bass module 4-wire cable to connect the B1 bass module to the power stand. The
power stand uses the signals on two of the wires to automatically sense how many B1
bass modules are connected.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Svenska
Nederlands
Italiano
FSrvaennçsakias
NeEdsepralañnodl s
FDItreaulnitaçsnacoihs
DEDseapunatssñckohl
EDnagnlisskh
SYSTEM SETUP
Adding a T1 ToneMatchTM audio engine (optional)
The T1 ToneMatchTM audio engine provides additional input/output capabilities to your
system, plus digital signal processing to customize the way you sound. The audio engine
comes with hardware for mounting it on the left or right side of the L1TM model II Cylindrical
Radiator® loudspeaker.
of the top section before starting this procedure.
1. Slide the carriage into the channel on the rear of the L1 bottom and turn the knob
clockwise to lock it in place (Figure 8).
2. Insert the mounting bar into the slot in the carriage and push it downward.
3. Place the T1 on the mounting bar as shown.
4. Plug one end of the ToneMatch cable (supplied with the audio engine) into the
ToneMatch output port ( ) on the T1.
5. Using the hook and loop strap, secure the cable to the carriage.
6. Plug the other end of the cable into the ToneMatch port on the power stand.
Figure 8
Mounting the T1
T1 ToneMatch
audio engine
T1 ToneMatch
audio engine
4
3
Hook and loop strap
5
Mounting bar
2
ToneMatch cable
(supplied with T1)
Carriage
L1 model II
Cylindrical
Radiator®
bottom
Locking knob
1
L1 model II Cylindrical
Radiator® loudspeaker bottom
6
Power stand
12
Download from Www.Somanuals.com. All Manuals Search And Download.
EDnagnlisskh
DEDseapunatssñckohl
FDItreaulnitaçsnacoihs
NeEdsepralañnodl s
FSrvaennçsakias
Italiano
Nederlands
Svenska
SYSTEM SETUP
Adding a second B1 bass module (optional)
One or two additional B1 modules can be added with the use of a PackLite® power amplifier.
Refer to “Adding a PackLite® power amplifier model A1 (optional)” on page 14.
CAUTION: Do not connect more than two B1 bass modules to the Bass Module Out
connector on the power stand. Driving more than two B1 bass modules from this output
improperly loads the amplifier in the power stand, resulting in less than full system performance.
1. Connect the first B1 to the Bass Module Out connector on the power stand.
2. Plug one end of the second B1 cable into the unused connector of the first B1. Plug the
other end of the cable into one of the connecetors of the second B1.
Figure 9
Installation of two B1 bass
modules
Second B1
bass module
cable
Bass Module Out
First B1 bass
module cable
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Svenska
Nederlands
Italiano
FSrvaennçsakias
NeEdsepralañnodl s
FDItreaulnitaçsnacoihs
DEDseapunatssñckohl
EDnagnlisskh
SYSTEM SETUP
Adding a PackLite® power amplifier model A1 (optional)
Using a PackLite® power amplifier model A1 allows you to add one or two additional B1 mod-
ules to your system. Refer to the A1 owner’s guide for detailed operating instructions.
1. Make sure the A1 amplifier power switch is OFF.
2. Plug one end of the supplied ¼" TRS cable into the Bass - Line Out connector on the
power stand. Plug the other end into the INPUT connector on the A1 amplifier.
3. Connect a B1 bass module cable from the OUTPUT connector on the A1 to a B1 bass
module. If desired, connect a second B1 to the first B1.
4. Plug one end of the AC power cord into the A1 amplifier and plug the other end into an
AC (mains) outlet.
5. Switch the A1 power switch to ON (I).
Figure 10
Connecting the A1
amplifier to the power
stand
PackLite® power
amplifier
Power stand
Bass - Line Out
Additional B1
bass modules
CAUTION: DO NOT stack more than four
B1 modules in a column.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
EDnagnlisskh
DEDseapunatssñckohl
FDItreaulnitaçsnacoihs
NeEdsepralañnodl s
FSrvaennçsakias
Italiano
Nederlands
Svenska
OPERATING INFORMATION
Setting the analog input level
When connecting an audio source to the Analog Input, follow these steps to adjust the input
Trim control.
1. Set the Trim control on the power stand to the 0 (zero) position.
2. Connect the audio source to the Analog Input.
3. Adjust the volume of the audio source to the desired level.
4. While playing the source, increase the Trim level until the Signal/Clip indicator glows
green or yellow.
5. If the Signal/Clip indicator glows red, decrease the Trim level so that it glows only green
or yellow.
Using a T1 ToneMatchTM audio engine and an analog input source
The L1TM model II system can operate with both a T1 ToneMatchTM audio engine and an ana-
log audio source connected to the power stand. However, keep in mind that the volume level
of the audio engine and the analog audio source is adjusted independently.
• The power stand Trim control only affects the volume level of the analog audio source con-
nected to the Analog Input. Therefore, the Signal/Clip indicator indicates the status only
of the analog input signal.
• The T1 ToneMatch audio engine has a Trim control and signal/clip indicator for each input,
a Volume control for each output channel, and a Master volume control that adjusts the
level of the ToneMatch output sent to the power stand. These controls have no effect on
the signal fed to the Analog Input.
User scenarios
There are many ways to set up and use this system with and without the T1 ToneMatch audio
engine. The following pages show examples of some typical user scenarios. When using the
T1 ToneMatch audio engine, refer to its owner’s guide for more information on setup and
operation.
A solo musician might play a single instrument through the L1 model II system (Figure 11).
A solo musician also might play an instrument and use a microphone for vocals (Figure 12 on
page 16).
Figure 11
Single L1 model II system
with keyboard
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Svenska
Nederlands
Italiano
FSrvaennçsakias
NeEdsepralañnodl s
FDItreaulnitaçsnacoihs
DEDseapunatssñckohl
EDnagnlisskh
OPERATING INFORMATION
Figure 12
Single L1TM model II system
with guitar and microphone
T1 ToneMatchTM
audio engine
Multiple musicians
In this scenario, a keyboard-guitar duo sings and plays through a single T1 ToneMatch audio
engine and an L1 model II system.
Figure 13
Single L1 model II system
with multiple instruments
and T1 ToneMatch audio
engine
T1 ToneMatch
audio engine
16
Download from Www.Somanuals.com. All Manuals Search And Download.
EDnagnlisskh
DEDseapunatssñckohl
FDItreaulnitaçsnacoihs
NeEdsepralañnodl s
FSrvaennçsakias
Italiano
Nederlands
Svenska
OPERATING INFORMATION
Full band
A full band scenario is built around multiple T1 ToneMatchTM audio engines and L1TM model II
systems. Each musician plays and sings through a single T1 ToneMatch audio engine and L1
model II system.
Figure 14
Multiple L1 model II
systems, each with a T1
ToneMatch audio engine
T1 ToneMatch
audio engine
T1 ToneMatch
audio engine
T1 ToneMatch
audio engine
T1 ToneMatch
audio engine
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Svenska
Nederlands
Italiano
FSrvaennçsakias
NeEdsepralañnodl s
FDItreaulnitaçsnacoihs
DEDseapunatssñckohl
EDnagnlisskh
OPERATING INFORMATION
DJ events
DJs use many types of input sources (CD player, turntable, MP3 player, etc.) plugged into a
mixer. In this scenario, two mixer outputs can be fed into two L1TM model II systems for stereo
sound.
Figure 15
Two L1 model II systems, a
mixer, and input devices
18
Download from Www.Somanuals.com. All Manuals Search And Download.
EDnagnlisskh
DEDseapunatssñckohl
FDItreaulnitaçsnacoihs
NeEdsepralañnodl s
FSrvaennçsakias
Italiano
Nederlands
Svenska
CARE AND MAINTENANCE
Caring for your product
Cleaning
• Clean the product enclosures using only a soft, dry cloth.
• Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia,
or abrasives.
• Do not use any sprays near the product or allow liquids to spill into any openings.
• If necessary, you may carefully vacuum the grille of the L1TM model II Cylindrical Radiator®
loudspeaker.
Getting service
For additional help in solving problems, contact Bose® Live Music Customer Service Product
and Technical Support Team at (877) 335-2673 or visit our support area online at
Troubleshooting
If you experience problems while using this product, try the following solutions. If you still
can’t solve the problem, please call the Bose Live Music Product and Technical Support
Team direct at (877) 335-2673 to arrange for service.
Recommended troubleshooting tools
• Portable voltmeter
• Cable tester
• XLR and ¼" phone plug cables
• B1 bass module 4-wire cable
• Spare AC power cord
• AC outlet tester
Problem
What to do
System is plugged in,
power switch is on, but
power LED is off
• Make sure you have power at the AC outlet. Try operating a lamp or other equipment
from the same AC outlet or test the outlet using an AC outlet tester.
• Make sure the power stand’s power cord plug is fully inserted into the AC outlet.
Power LED is on (green),
but no sound
• Make sure volume control is turned up on your instrument.
• Make sure the Trim level control is turned up on the power stand.
• Make sure your instrument is plugged into the Analog Input jack.
• Connect your instrument to the power stand using a different cable.
• Plug your instrument into a different amplifier to make sure the instrument is working.
Power LED is red while the • Please call Bose Live Music Customer Support at (877) 335-2673 for assistance.
power stand is on
House circuit breaker
keeps tripping
• If more than one power stand is plugged into the same AC circuit, stagger the turn-on
times. Each power stand has an inrush current of about 32 amps when turned on.
• If you have more than three power stands plugged into a single 15 amp circuit, move
some systems to another AC circuit. Each power stand can draw 5 amps or more when
playing at high volumes for long periods of time.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Svenska
Nederlands
Italiano
FSrvaennçsakias
NeEdsepralañnodl s
FDItreaulnitaçsnacoihs
DEDseapunatssñckohl
EDnagnlisskh
CARE AND MAINTENANCE
Problem
What to do
With nothing plugged into • Using an AC outlet tester, test the AC outlet that the power stand is plugged into for
the power stand, a slight
hum or buzz is heard
reversed or open (hot, neutral, and/or ground) contacts.
• If using an extension cord, make sure that the cord is also tested as above.
B1 bass module is plugged • Make sure you are using the included 4-wire B1 bass module cable.
in, but no bass audio is
heard
• Make sure the B1 bass module cable is plugged into the Bass Module Out connector
and the cable plug is fully engaged in the connector.
• Try a different 4-wire cable.
• If available, try a different B1 bass module.
B1 bass module sounds
out of balance with the
system
• Make sure you are using the B1 bass module 4-wire cable included with the B1 bass
module package.
• Make sure that the B1 bass module grille is facing forward toward the musicians and
audience.
• Make sure the L1 model II Cylindrical Radiator® loudspeaker top and bottom are firmly
seated in their connectors.
• Make sure connections are not bent or broken.
• Try cleaning the contacts on the loudspeaker top and bottom with electronic contact
spray cleaner.
No mid/high sounds heard
from the L1TM model II
Cylindrical Radiator®
loudspeaker
Instrument or audio source • Make sure the Signal/Clip LED is not constantly red. If it is, lower the trim level.
sounds distorted
• Try a different source or instrument.
• Try your source or instrument on another power stand.
Third-party-powered sub- • Unplug any B1 bass modules that may be connected to the power stand.
woofer sounds poor when
connected to the Bass -
Line Out connector on the
power stand
• The signal from the Bass - Line Out may be too high for the powered subwoofer; try
attenuating the signal using commercially available direct boxes or in-line pad devices.
• Try different connections to the third-party-powered subwoofer, such as balanced or
unbalanced cabling and/or a direct box.
• Check that the gain and input controls on the third-party-powered subwoofer are set
appropriately.
• If using a powered subwoofer with an adjustable crossover, set the crossover to 180Hz.
B1 bass modules powered • Ensure that at least two B1 bass modules are directly connected to the Bass Module
by a third-party power
amplifier and connected to
the Bass - Line Out
Out connector on the power stand using a B1 bass module 4-wire cable.
• Check the gain settings on the third-party power amplifier. The volume level of the B1
bass modules powered by the power stand should be similar to the bass modules pow-
ered by the external amplifier.
connector sounds poor
Microphone is
encountering feedback
• Orient the microphone so that it is not pointing directly at its respective L1 model II
Cylindrical Radiator® loudspeaker.
• Try a different microphone.
• Try a different position for the loudspeaker and/or vocalist on stage.
• Increase the distance from the loudspeaker to themicrophone.
• If using a vocal effects processor, make sure it is not contributing to the feedback
problem.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
EDnagnlisskh
DEDseapunatssñckohl
FDItreaulnitaçsnacoihs
NeEdsepralañnodl s
FSrvaennçsakias
Italiano
Nederlands
Svenska
CARE AND MAINTENANCE
Limited Warranty and Registration
Your product is covered by a limited transferable warranty. Details of the warranty are
call (800) 905-1044. Failure to do so will not affect your warranty rights.
Accessories
Technical Information
Mechanical
Dimensions
Weight
L1TM model II power stand:
5''H x 10''W x 27''D
(12.8 cm x 26.2 cm x 69.2 cm)
23.7 lb
(10.7 kg)
L1 model II Cylindrical Radiator®
loudspeaker top:
43½''H x 3½''W x 4''D
(11.1 cm x 9.0 cm x 10.5 cm)
16.3 lb
(7.4 kg)
L1 model II Cylindrical Radiator®
loudspeaker bottom:
43½''H x 3½''W x 4''D
(11.1 cm x 9.0 cm x 10.5 cm)
17.4 lb
(7.9 kg)
B1 bass module:
15''H x 10¼''W x 17¾''D
(38.0 cm x 26.0 cm x 45.0 cm)
25.1 lb
(11.4 kg)
Electrical
• AC power rating:
100-120V
50/60Hz 500W (USA/Canada); 220-240V
50/60Hz 500W (Europe)
• Peak inrush current:
32A @ 120V
60Hz (USA/Canada); 61A @ 230V
50Hz (Europe)
Impedance
L1TM model II Cylindrical
Radiator® loudspeaker: 4Ω
B1 bass module:
8Ω
Audio Input/Output
• T1 ToneMatchTM port: DC output/data input Ethercon/RJ45 connector for a
T1 ToneMatch audio engine
• Analog Input:
Line-level input channel for ¼" TRS phone plug
• Bass - Line Out:
-4dBu (nominal), +9dBu (max.) (balanced TRS connection)
-10dBu (nominal), +3dBu (max.) (unbalanced TS connection)
• Bass Module Out:
Neutrik NL4 output for one or two B1 bass modules
21
Venice_Care+Maint.fm
1/07
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
©2007 Bose Corporation, The Mountain,
Framingham, MA 01701-9168 USA
303153 AM Rev.00 N10I
Download from Www.Somanuals.com. All Manuals Search And Download.
|