Bose Stereo System 25 Series II User Guide page
®
®
The Bose Lifestyle 25 Series II System  
Owner’s Guide  
October 29, 2001  
AM196575_05_V.pdf  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Information  
WARNING: To reduce the risk of fire or electric shock, do not expose the system to rain or  
moisture.  
AVIS  
RISQUE DE CHOC ÉLECTRIQUE  
NE PAS OUVRIR  
CAUTION  
RISK OF ELECTRICAL SHOCK  
DO NOT OPEN  
N  
ATTENTION : POUR RÉDUIRE LE RISQUE DE DÉCHARGE  
ÉLECTRIQUE, NE RETIREZ PAS LE COUVERCLE (OU  
L’ARRIÈRE). IL NE SE TROUVE ÀL’INTÉRIEURAUCUNE  
PIÈCE POUVANT ÊTRE RÉPARÉE PARL’USAGER.  
S’ADRESSER À UN RÉPARATEUR COMPÉTENT.  
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,  
DO NOT REMOVE COVER (OR BACK).  
NO USER-SERVICABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED PERSONNEL.  
These CAUTION marks may be located on the back panel and bottom of your Lifestyle®  
music center and the bottom panel of your Acoustimass® module:  
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert  
the user to the presence of uninsulated dangerous voltage within the system enclosure that  
may be of sufficient magnitude to constitute a risk of electric shock.  
The exclamation point within an equilateral triangle, as marked on the system, is intended to  
alert the user to the presence of important operating and maintenance instructions in this  
owner’s guide.  
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, insert fully.  
Class 1 laser product  
This compact disc player is classified as a CLASS 1 LASER product. The CLASS 1 LASER  
PRODUCT label is located on the bottom  
CLASS  
KLASSE 1  
LUOKAN  
KLASS  
1
LASER PRODUCT  
LASER PRODUKT  
LASER LAITE  
of the unit.  
CAUTION: Use of controls or adjustments or performance of  
1
1
LASER APPARAT  
procedures other than those specified herein may result in hazardous radiation exposure. The  
compact disc player should not be adjusted or repaired by anyone except properly qualified  
service personnel.  
Class B emissions limits  
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing  
Equipment Regulations.  
Batteries  
Please dispose of used batteries properly, following any local regulations. Do not incinerate.  
Additional safety information  
See the additional instructions on the Important Safety Information page enclosed with this  
owner’s guide.  
Please read this owner’s guide  
Please take the time to follow this owner’s guide carefully. It will help you set up and operate  
your system properly, and enjoy all of its advanced features. Save your owner’s guide for  
future reference.  
Product manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of  
Dolby Laboratories.  
2
October 29, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AM196575_05_V.pdf  
Important Safety Instructions  
1. Read these instructions – for all components  
14. Refer all servicing to qualified service person-  
nel. Servicing is required when the apparatus  
has been damaged in any way: such as power-  
supply cord or plug is damaged; liquid has  
been spilled or objects have fallen into the  
apparatus; the apparatus has been exposed to  
rain or moisture, does not operate normally, or  
has been dropped – Do not attempt to service this  
product yourself. Opening or removing covers may  
expose you to dangerous voltages or other hazards.  
Please call Bose to be referred to an authorized  
service center near you.  
before using this product.  
2. Keep these instructions – for future reference.  
3. Heed all warnings – on the product and in the  
owner’s guide.  
4. Follow all instructions.  
5. Do not use this apparatus near water or  
moisture – Do not use this product near a  
bathtub, washbowl, kitchen sink, laundry tub, in a  
wet basement, near a swimming pool, or any-  
where else that water or moisture are present.  
15. To prevent risk of fire or electric shock, avoid  
overloading wall outlets, extension cords, or  
integral convenience receptacles.  
6. Clean only with a dry cloth – and as directed  
®
by Bose Corporation. Unplug this product from  
the wall outlet before cleaning.  
16. Do not let objects or liquids enter the product –  
as they may touch dangerous voltage points or  
short-out parts that could result in a fire or electric  
shock.  
7. Do not block any ventilation openings.  
Install in accordance with the  
manufacturer’s instructions – To ensure  
reliable operation of the product and to protect it  
from overheating, put the product in a position  
and location that will not interfere with its proper  
ventilation. For example, do not place the product  
on a bed, sofa, or similar surface that may block  
the ventilation openings. Do not put it in a built-in  
system, such as a bookcase or a cabinet that may  
keep air from flowing through its ventilation  
openings.  
17. See product enclosure for safety related  
markings.  
Information about products that  
generate electrical noise  
If applicable, this equipment has been tested and found  
to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC rules. These limits are  
designed to provide reasonable protection against  
harmful interference in a residential installation. This  
equipment generates, uses, and can radiate radio  
frequency energy and, if not installed and used in accor-  
dance with the instructions, may cause harmful interfer-  
ence to radio communications. However, this is no  
guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interfer-  
ence to radio or television reception, which can be  
determined by turning the equipment off and on, you are  
encouraged to try to correct the interference by one or  
more of the following measures:  
8. Do not install near any heat sources, such  
as radiators, heat registers, stoves or other  
apparatus (including amplifiers) that pro-  
duce heat.  
9. Do not defeat the safety purpose of the  
polarized or grounding-type plug. A polar-  
ized plug has two blades with one wider  
than the other. A grounding-type plug has  
two blades and a third grounding prong. The  
wider blade or third prong are provided for  
your safety. If the provided plug does not fit  
in your outlet, consult an electrician for  
replacement of the obsolete outlet.  
10. Protect the power cord from being walked  
on or pinched, particularly at plugs, conve-  
nience receptacles, and the point where  
they exit from the apparatus.  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and  
receiver.  
11. Only use attachments/accessories speci-  
fied by the manufacturer.  
• Connect the equipment to an outlet on a different  
12. Use only with the cart, stand, tripod,  
bracket or table specified by the  
manufacturer or sold with the  
apparatus. When a cart is used,  
use caution when moving the  
cart/apparatus combination to  
avoid injury from tip-over.  
circuit than the one to which the receiver is connected.  
• Consult the dealer or an experienced radio/TV techni-  
cian for help.  
Note: Unauthorized modification of the receiver or radio  
remote control could void the user’s authority to operate  
this equipment.  
13. Unplug this apparatus during lightning  
storms or when unused for long periods of  
time – to prevent damage to this product.  
This product complies with the Canadian ICES-003 Class  
B specifications.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
October 29, 2001  
AM196575_05_V.pdf  
a
2
Important Safety Instructions  
18. Use proper power sources – Plug the product into  
a proper power source, as described in the operating  
instructions or as marked on the product.  
Antenna grounding  
Example of antenna grounding as per National Electrical  
Code, ANSI/NFPA 70.  
19. Avoid power lines – Use extreme care when  
installing an outside antenna system to keep from  
touching power lines or circuits, as contact with  
them may be fatal. Do not install external antennas  
near overhead power lines or other electric light or  
power circuits, nor where an antenna can fall into  
such circuits or power lines.  
Antenna lead in wire  
20. Ground all outdoor antennas – If an external  
antenna or cable system is connected to this  
product, be sure the antenna or cable system is  
grounded. This will provide some protection against  
voltage surges and built-up static charges.  
Ground clamp  
Antenna discharge unit  
(NEC Section 810-20)  
Grounding conductors  
(NEC Section 810-21)  
Electric service  
equipment  
Section 810 of the National Electrical Code ANSI/  
NFPA No. 70 provides information with respect to  
proper grounding of the mast and supporting  
structure, grounding of the lead-in wire to an antenna  
discharge unit, size of grounding conductors,  
location of antenna-discharge unit, connection to  
grounding electrodes, and requirements for the  
ground electrode. Refer to the antenna grounding  
illustration on this page.  
Ground clamps  
Power service grounding  
electrode system  
(NEC ART 250, Part H)  
Note to CATV system installer  
This reminder is provided to call the CATV system  
installer’s attention to Article 820-40 of the NEC (of USA)  
that provides guidelines for proper grounding. In particu-  
lar, it specifies that the cable ground shall be connected  
to the grounding system of the building, as close to the  
point of cable entry as is practical.  
©2001 Bose Corporation,  
The Mountain, Framingham, MA  
01701-9168 USA  
255805 AM Rev.00 JN10494  
Download from Www.Somanuals.com. All Manuals Search And Download.  
October 29, 2001  
2 b  
AM196575_05_V.pdf  
Contents  
Where to find…  
Setting Up  
Before you begin........................................................................................................... 4  
Unpacking the carton ................................................................................................... 5  
Selecting the locations for your Lifestyle® 25 Series II system ..................................... 6  
Connecting the speakers and Lifestyle® music center.................................................. 9  
Connecting your home theater components to the Lifestyle® 25 system................... 12  
Connecting the antennas............................................................................................ 16  
Installing the batteries in the remote control .............................................................. 17  
Setting radio channel spacing for dual voltage and 120V systems............................ 17  
Operating Your Lifestyle® 25 System  
Turning on the music center ....................................................................................... 18  
The music center display ............................................................................................ 18  
The music center controls .......................................................................................... 19  
The Lifestyle® 25 remote control ................................................................................. 19  
The system controls.................................................................................................... 20  
Additional system controls ......................................................................................... 21  
Listening to your Lifestyle® 25 system ........................................................................ 22  
Operating the special features .................................................................................... 23  
Chimes ........................................................................................................................ 23  
Listening to digital sound............................................................................................ 24  
Listening to compact discs......................................................................................... 24  
Listening to the radio .................................................................................................. 27  
Using the system with external components.............................................................. 28  
Maintaining Your Lifestyle® 25 System  
Fine-tuning your system ............................................................................................. 29  
Using two listening zones ........................................................................................... 30  
Changing the house code settings ............................................................................. 32  
Taking care of your Lifestyle® 25 system .................................................................... 33  
Troubleshooting .......................................................................................................... 34  
Warranty period .......................................................................................................... 35  
Customer service ........................................................................................................ 35  
Product Information  
Technical information.................................................................................................. 36  
Accessories................................................................................................................. 36  
Index ................................................................................................................................. 37  
Bose® Corporation ....................................................................................inside back cover  
For your records  
Serial numbers are located on the bottom of the music center and the bottom panel of the  
Acoustimass® module.  
Music center serial number:______________________________________________________  
Acoustimass module serial number: ______________________________________________  
Dealer name: __________________________________________________________________  
Dealer phone:_______________________ Purchase date: ___________________________  
We suggest you keep your sales slip and warranty card together with this owner’s guide.  
AM196575_05_V.pdf  
October 29, 2001  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Up  
Before you begin  
Thank you for purchasing the Bose® Lifestyle® 25 Series II system. This complete audio home  
entertainment system offers superb sound, elegance, technology, and simplicity for music  
and home theater. Your system is fully compatible with digital program material and includes:  
• A Lifestyle® music center with built-in AM/FM radio and six-disc CD changer  
• Inputs for two video sound sources, a digital sound source, and a tape deck (or other  
auxiliary source)  
• Capability for operating two listening zones  
• Powered Acoustimass® speakers with a hideaway Acoustimass module and five cube  
speaker arrays  
• An easy-to-use remote control  
Realism and impact  
Your Lifestyle® 25 Series II home theater system is equipped with an all new Videostage®  
decoder that uses digital signal processing. The result is increased surround sound realism  
and impact both for movie soundtracks and music recordings. Built-in Dolby Digital decoding  
of inputs from DVD, digital TV, next-generation cable boxes, and satellite receivers provides  
“5.1” capability – up to five discrete audio channels directed into five independent cube  
speaker arrays, plus rich bass sound from the Acoustimass module. The Videostage decoder  
processes analog formats, as well as two or even single-channel PCM and Dolby Digital  
bitstreams, and helps to deliver the acoustic experience of the movies right in your home.  
Compatibility  
Your system is fully compatible with:  
• Digital-audio bitstreams. Look for the symbol  
1
PCM on DVD-Video discs. Your Lifestyle® 25 Series II system cannot process MPEG-2  
or DTS digital bitstreams.  
or the terms Dolby Digital or  
• Surround-sound sources such as VCRs, stereo TVs, cable boxes and satellite  
receivers. Videostage decoding directs stereo information to the surround channels, so  
the sound of stereo broadcasts and rented or recorded tapes can approach that of  
your DVD discs.  
• Surround-encoded analog or digital audio signals. Look for the terms Surround or  
Dolby Surround, or the symbol  
preceding a TV broadcast.  
3
on tapes and discs, or the word “surround”  
• Stereo program material from TV, FM, CD, and cassette. Videostage decoding  
delivers five channels, even when the original source contained only one or two.  
• Monaural program material. Videostage decoding can process a one-channel  
program into five-channel sound and direct the result to five independent speakers.  
Dialogue remains locked on-screen, while music and ambient effects fill the room.  
Automatic sound level monitoring and control  
Your enjoyment of movies at home is enhanced by Digital Dynamic Range® compression. This  
technology automatically monitors and adjusts the volume to allow you to hear soft sounds,  
particularly dialogue, and to prevent you from being overwhelmed by a loud special effect  
(e.g., a crash or explosion). This feature is especially useful for late night movie viewing – it  
eliminates the need for you to constantly adjust the volume level. (See pages 22-23.)  
4
October 29, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AM196575_05_V.pdf  
Setting Up  
Unpacking the carton  
Carefully unpack your system. Save all packing materials for possible future use. The  
original packing materials provide the safest way to transport your Lifestyle® 25 system. If  
any part of the product appears damaged, do not attempt to use the system. Notify Bose®  
or your authorized Bose dealer immediately.  
Check to be sure your Lifestyle® 25 system contains the parts identified in Figure 1.  
Note: Find the serial numbers on the bottom panel of the Acoustimass® module and the  
bottom of the music center. Then write them on your warranty card and in the spaces  
provided on page 3.  
CAUTION: Ensure the three shipping screws on the bottom of the music center are  
removed before turning on the system.  
WARNING: The Acoustimass module weighs 33 pounds (15 kg). Use good lifting  
practice to avoid injury.  
WARNING: To avoid danger of suffocation, keep the plastic bags out of the reach of  
children.  
Figure 1  
What comes with your  
Lifestyle® 25 Series II system:  
• Lifestyle® music center  
• AC power (mains) pack*  
• FM antenna  
• AM loop antenna  
• Antenna base  
Acoustimass  
module  
®
Lifestyle® music center  
T
r
eb  
le  
Ba  
ss  
• Remote control  
• 3 AA batteries  
• Acoustimassmodule  
• 5 cube speaker arrays  
• AC power (mains) cord*  
• Audio input cable  
• 5 speaker cables  
(3 front and 2 surround)  
• 8 self-adhesive rubber feet  
• Stereo cable  
Audio input cable  
5 cube speaker arrays  
AC power pack  
®
• CD magazine  
AA  
batteries  
CD magazine  
Surround speaker cables  
(orange connectors)  
• Lifestyle® system CD  
• Test CD  
AC power cord  
Remote control  
Antenna  
base  
Front speaker cables  
(blue connectors)  
FM antenna  
T
E
HE  
B
OSE  
S
PECIAL  
DITION  
L
IFESTYLE  
M
USIC  
S
YSTEM  
CD  
Rubber  
feet  
®
Stereo cable  
Lifestyle® system CD  
Test CD  
*
Power cord and pack shown above are USA/Canada versions.  
Dual voltage systems include 1 power cord, 1 adapter , and 2 power packs.  
The power cords and packs for Europe, UK/Singapore, and Australia are shown below.  
Europe  
UK/Singapore  
Australia  
AM196575_05_V.pdf  
October 29, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Setting Up  
®
Selecting the locations for your Lifestyle 25 Series II system  
When you place your speakers according to the guidelines below, a combination of reflected  
and direct sound provides the audio atmosphere of a home theater. You may experiment with  
the placement and orientation of the cubes to produce the sound most pleasing to you. For  
more discussion of speaker placement and room acoustics, see “Fine-tuning your system”  
on page 29.  
Speaker locations  
Follow these guidelines to select locations that provide the maximum home theater effect  
from your Lifestyle® 25 system (Figures 2 and 3).  
CAUTION: Choose a stable and level surface for your speakers. Vibration can cause the  
cube speakers to move, particularly on smooth surfaces like marble, glass, or highly polished  
wood. If you are placing the center speaker on top of the television, use the smaller of the two  
sets of rubber feet provided. You may obtain additional rubber feet (part no. 178321), free of  
charge, by contacting Bose® Customer Service (see listings on the inside back cover).  
Left and right front speakers  
The sound from the left and right front speakers should seem to appear at the edge of the  
picture, so that the acoustic image is close to the size of the visual image (Figure 2).  
1. Place the cubes so that they line up with the center of the TV screen.  
2. Place them up to 3 feet (1 m) from the edge of the TV screen.  
We recommend a maximum distance of 3 feet (1 m) so that the sound does not become  
too separated from the picture. You may wish to vary this distance based on room condi-  
tions and personal preference. The front cables allow the cube speakers to be placed up  
to 20 feet (6.1 m) from the Acoustimass module.  
3. Direct one cube of each array forward. Direct the other cube toward the wall or in a  
different direction to create reflected sound. (See the illustration of reflected sound pat-  
terns in Figure 3.)  
Note: The cube speakers are magnetically shielded so you can place them close to the  
TV without affecting picture quality.  
Center speaker  
The sound from the center speaker should appear to come directly from the center of the  
picture (Figure 2). The center speaker cable allows up to 20 feet (6.1 m) distance from the  
Acoustimass module.  
1. Place the center speaker directly above or below the center of the TV screen, or at the  
closest convenient location.  
2. Align the speaker with the front of the TV screen (not pushed to the back of the TV).  
3. Direct each of the cubes slightly away from center, to create a wider area of direct sound  
(Figure 3).  
Note: If you put the speakers in a bookcase unit, be sure to place each one at the front  
edge of the shelf. Placing speakers in an enclosed space can change the tonal quality of the  
sound. This effect is minimized if the shelves are filled with books.  
6
October 29, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AM196575_05_V.pdf  
Setting Up  
Center  
Figure 2  
Recommended front speaker  
locations  
Right front  
Left front  
Surround speakers  
The surround (rear) speakers create an area of sound around the listener. Place them in the  
back half of your room. Direct the cubes so that you cannot pinpoint the exact location of the  
sound source (Figure 3). The surround cables allow up to 50 feet (15.2 m) distance from the  
Acoustimass® module.  
Left  
front  
Right Acoustimass  
front module  
Figure 3  
Center  
Speaker placement  
Left  
surround  
Right  
surround  
1. Place the speakers at ear height or higher, if possible.  
2. Adjust the rear surround speakers to direct the sound to the front and back of the listener.  
AM196575_05_V.pdf  
October 29, 2001  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Up  
®
Acoustimass module  
Follow these guidelines to select a location for the Acoustimass module.  
Note: To avoid interference with the TV picture, place the Acoustimass module at least  
18 inches (45 cm) from the TV.  
1. Place the Acoustimass module along the same wall as the TV, or close to the same end of  
the room as the front speakers (see the example along the front wall in Figure 3).  
2. Select a convenient location – under a table, behind a sofa. Do not allow furniture or  
drapes to block the ventilation openings of the module.  
3. Place the Acoustimass module within reach of the audio input cable, speaker cables, and  
an AC power (mains) outlet.  
4. Select a position for the Acoustimass module (Figure 4). For proper ventilation, place it on  
the long edge, with the connectors facing the floor. An alternate position is on its largest  
side, with the bass and treble controls facing up. Do not place the module on either end,  
as shown by the last two views in Figure 4.  
Figure 4  
®
Acoustimass module positions  
RIGHT  
REAR  
RIGHT  
FRONT  
Preferred  
position  
Alternate position  
LEFT  
REAR  
CENTER  
®
LEFT  
FRONT  
OUTP  
UTS  
KERS  
TO  
CUBE  
®
SPEA  
Tre  
ble  
Bas  
s
®
5. Once you have selected a position for the module, place the four self-adhesive rubber feet  
near the corners of the bottom surface. The rubber feet provide increased stability and  
protection from scratches.  
6. Aim the port (the round opening) into the room or along the wall to avoid blocking the port  
or creating too much bass.  
7. For best bass performance, do not place the port at equal distances from any two walls or  
from a wall and the ceiling.  
CAUTION: Do not cover the ventilation openings of the Acoustimass module. The slots on  
the end provide ventilation for the built-in electronic circuitry, and should not be blocked.  
CAUTION: The magnetic field from the Acoustimass module is not an immediate risk to your  
video tapes, audio tapes, and other magnetic media. However, you should not store tapes  
directly on or near the Acoustimass module.  
Music center  
Select a location for the music center.  
1. Allow enough room to open the CD player cover.  
2. Place the music center close enough to the sound sources (TV, VCR, DVD player etc.) to  
allow for cable length. If you need additional audio and/or video cables to connect all of  
your components, see your dealer or call Bose®.  
3. Place the music center within 30 feet (9.1 m) of the Acoustimass module (the length of the  
audio input cable).  
8
October 29, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AM196575_05_V.pdf  
Setting Up  
®
Connecting the speakers and Lifestyle music center  
Once you have selected locations for your music system, connect the speakers.  
CAUTION: Make sure all components are unplugged from the power outlet before you  
begin hooking up the system.  
®
Connecting the cube speaker arrays to the Acoustimass  
module  
Each speaker cable contains two wires. The wire marked with a red collar is positive (+) and  
the plain one is negative (–). These wires match the positive (red) and negative (black) termi-  
nals on the back of each speaker. To lengthen the cable, use heavy-duty RCA extension  
cables or splice in 18-gauge or thicker cord (connecting + to + and – to –). To purchase  
cables, see your dealer or electronics store, or call Bose® customer service.  
Note: The surround cables are joined together for your convenience, providing an easy-to-  
use cable for connecting the surround speakers. To run the cables in different directions from  
the Acoustimass module, simply pull apart the cables as needed.  
1. Match the correct cable to the corresponding speaker location.  
• Front speaker cables have blue connectors at one end, with L, R, or C molded into the  
connectors. The red collars on the + wire are labeled LEFT, RIGHT, and CENTER.  
• Surround speaker cables have orange connectors at one end, with L or R molded into  
the connectors. The red collars on the + wire are labeled LEFT and RIGHT.  
2. Connect the wire end of one speaker cable to the terminals on the rear of the matching  
cube speaker array.  
a. Press the terminal tab on the back of the cube array to insert the marked wire into the  
red terminal and the plain wire into the black terminal. Release the tab to secure the  
wire.  
b. Repeat this step for each of the five cube speaker arrays. (See Figure 5.)  
Figure 5  
Speaker cable connections to  
the cube speaker array  
CAUTION: Make sure no strands of wire from any terminal touch any other terminal.  
Bridged wires create short circuits that affect proper operation of your system.  
3. Connect each cable to the corresponding jack on the Acoustimass module.  
a. Plug the blue connectors into the matching left front, center, and right front jacks.  
b. Plug the orange connectors into the matching left surround and right surround jacks.  
AM196575_05_V.pdf  
October 29, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
Setting Up  
®
®
Connecting the Acoustimass module to the Lifestyle music  
center  
Connect the Acoustimass module to the music center with the audio input cable (Figure 6).  
1. Plug the small black multi-pin connector (flat side facing up) into the jack marked  
SPEAKER ZONE 1 on the rear of the music center.  
2. Insert the single right-angle multi-pin connector on the other end of the audio input cable  
into the AUDIO INPUT jack on the Acoustimass module. Align the connector at the angle  
shown in Figure 6.  
Note: Connect your digital signal source to the female RCA connector. See “Connecting  
your home theater components...” on page 12.  
Note: Be sure that each connector is fully inserted into each jack.  
3. Extend the audio input cable as much as possible, since it includes an antenna for the  
remote control.  
Note: Refer to “Using two listening zones” on page 30 for information on connecting a  
second zone.  
Center  
speaker  
Left front  
speaker  
Figure 6  
Right front  
speaker  
Music center and speaker  
connections  
Right  
surround  
speaker  
Left  
surround  
speaker  
Right-angle  
connector  
into AUDIO  
INPUT  
AUDIO  
INPUT  
SURROUND  
FRONT  
RIGHT  
RIGHT  
LEFT  
CENTER  
LEFT  
OUTPUTS TO  
CUBE SPEAKERS  
Audio  
input  
cable  
AC power jack  
To digital signal  
source  
L
R
L
R
TAPE IN  
TAPE OUT  
Multi-pin connector into SPEAKER ZONE 1  
AC power pack  
10  
October 29, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AM196575_05_V.pdf  
Setting Up  
®
Connecting the Acoustimass module power (mains) cord  
1. On a dual voltage system, the voltage selector switch is preset at the factory to be correct  
for your area. Check to be sure it is set for the proper voltage (Figure 7). Use 115V for  
North America; 230V for Europe and Australia. In Europe, use the adapter plug provided. If  
you are in doubt, contact your local electric utility for the appropriate voltage setting.  
Figure 7  
230 V  
115 V  
Dual voltage Acoustimass  
module: voltage selector switch  
settings  
CAUTION: Make sure the voltage selector switch is set correctly.  
2. Plug the small end of the power (mains) cord into the Acoustimass module AC power jack.  
Note: Do not plug the AC power cord into a power outlet until all component connections  
are complete.  
Connecting the music center AC (mains) power pack  
The Lifestyle® music center comes with a 120V AC (mains) power pack for use in the USA  
and Canada or an appropriate 230V or 240V power pack for international use. (See Figures 1  
and 8.) Dual voltage models include both 120V and 230V power packs.  
CAUTION: Be sure to use the correct power pack for your area. Using the wrong one may  
damage your power pack or your music center.  
• Model PS71, 120V in North America  
• Model PS74, 230V in UK or Singapore  
• Model PS72, 230V in Europe  
• Model PS77, 240V in Australia  
Figure 8  
The AC power pack  
(model PS71 shown)  
1. Firmly insert the small connector on the end of the AC (mains) power pack cable into the  
AC POWER jack on the back of the Lifestyle® music center.  
2. Make sure that the power pack reaches an AC (mains) outlet.  
Note: Do not plug the AC power pack into a power outlet until all component connections  
are complete.  
AM196575_05_V.pdf  
October 29, 2001  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Up  
®
Connecting your home theater components to the Lifestyle 25 system  
There are many possible variations of equipment in a home theater. In addition to the  
Lifestyle® 25 system, a home theater complement typically includes a stereo or mono TV and  
stereo VCR. In a digital home theater system, the primary source may be a DVD player. Your  
home theater can include many other combinations of equipment, including cable TV,  
laserdisc players, additional VCRs, and a satellite decoder.  
Note: A mono TV only serves as a display for the video, not as a source for the audio.  
In order for the Lifestyle® 25 system to provide home theater effects, the program material  
must be in stereo or surround-encoded, and the device playing the material must be stereo.  
Look for the word “surround” on the tape, CD, or preceding the TV broadcast. To hear stereo  
or surround sound from encoded video tapes, you must have a stereo (HiFi) VCR. While not  
all VCRs deliver stereo, all CD, DVD, and nearly all laserdisc players do.  
Note: Line level outputs from most VCRs or laserdisc players are fixed. If your VCR, laser-  
disc player, or other video sound source has fixed and variable outputs, use the fixed out-  
puts.  
Setting up a digital sound source  
Connect a DTV or DVD player’s digital signal directly to the female RCA jack on the audio  
input cable. Connect the DVD player’s analog signal output to the AUX inputs. If your  
Lifestyle® system receives a valid digital signal (including PCM or Dolby Digital bitstreams),  
this digital sound is used. If no valid digital signal is received, then your system selects the  
analog signal being sent to AUX, which is then processed by the Videostage® decoder for  
excellent home theater sound. If your digital audio source has an optical connector, you will  
need an adapter with an RCA (coaxial) connector. Consult your dealer or contact Bose®.  
Note: Ensure the connection between the digital source and the Lifestyle® system is made  
using a 3 to 6 foot (1 to 2 m) standard audio cable or video cable. For longer lengths, use a  
75 ohm cable.  
DVD analog outputs to AUX inputs  
Figure 9  
Music center connectors  
Non-digital video sound source outputs to VIDEO inputs  
Setting up a video sound source  
The Lifestyle® 25 system has two sets of video sound inputs (Figure 9) for your non-digital  
video sound sources, such as your TV or VCR.  
Note: Your Lifestyle® 25 system includes one 6-foot (1.8 m) stereo cable to connect the right  
(R) and left (L) audio outputs from a component to the music center inputs. Cables may also  
be supplied with your components. If needed, audio cables are available at many electronics  
stores, or call Bose. Most audio cables are color coded. Match red connectors to right (R)  
jacks and black or white connectors to left (L) jacks.  
12  
October 29, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AM196575_05_V.pdf  
Setting Up  
How to set up your home theater  
There are two basic methods for setting up your home theater. It is best to connect compo-  
nents directly to the Lifestyle® 25 music center, and select the source from its remote or  
control panel. A second option is to use a stereo TV as the switching center to select the  
sound source. In each example, the analog outputs from the DVD player (or other digital  
device) are connected to the AUX inputs. You may need extra long audio cables or exten-  
sions for some of these connections.  
®
(1) To connect video sound sources directly to the Lifestyle 25 system  
You may connect up to three video sound sources directly to your system. For example,  
connect the analog outputs of your DVD player to AUX, the VCR fixed outputs to VIDEO 1,  
and the TV to VIDEO 2 on the back of your music center. (See Figure 10.) Connect the coaxial  
digital audio output from your DVD player to the female RCA connection on the audio input  
cable (connecting the music center with the module) using a male-to-male RCA cable.  
If a valid digital signal is received by the Lifestyle® 25 system through the audio input cable,  
the system plays that audio source. If no valid digital signal is received, it selects the backup  
analog signal being sent to AUX.  
When connecting your TV:  
• Connect the TV fixed audio outputs to the VIDEO 2 inputs on the music center.  
• Turn the TV speakers off or the volume all the way down. (If there is an internal/external  
speakers switch, select external speakers. Do not connect any speakers to the TV.)  
• Turn off any special TV settings such as expanded stereo, mega-bass, phantom, or  
SAP. They prevent proper surround processing through your Lifestyle® system.  
• Set the TV balance control to the center of the dial or range.  
• Set tone controls to flat or the middle position (neutral).  
• Set TV to the stereo position.  
Digital audio output  
Figure 10  
L
R
V
Connecting components to the  
Lifestyle® 25 system inputs  
DVD player  
Music center  
L
R
L
R
TAPE IN  
TAPE OUT  
L
L
R
R
V
Cable TV  
VCR  
TV  
To the module  
AM196575_05_V.pdf  
October 29, 2001  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Up  
(2) To direct video sound sources through your TV  
This is an alternative connection method. (See Figure 11.) If your stereo TV has fixed audio  
outputs (the audio signal level doesn’t change) and it allows you to select the source of the  
signal (VCR, laserdisc, cable, etc.), then you can:  
• Connect your DVD player L and R outputs to the music center AUX inputs.  
• Connect the DVD video output to one of the video inputs on the TV.  
• Connect the coaxial digital audio output from your DVD player to the female RCA  
connection on the audio input cable (connecting the music center with the module)  
using a male-to-male RCA cable.  
• Connect your home theater components to the TV inputs.  
• Connect the TV fixed audio outputs to the VIDEO 1 inputs on the music center.  
• Turn the TV speakers off or the volume all the way down. (If there is an internal/external  
speakers switch, select external speakers. Do not connect any speakers to the TV.)  
• Turn off any special TV settings such as expanded stereo, mega-bass, phantom or  
SAP. They prevent proper surround processing through your Lifestyle® system.  
• Set the TV balance control to the center of the dial or range.  
• Set tone controls to flat or the middle position (neutral).  
• Set TV to the stereo position.  
Note: If necessary, as a second choice, you can use the variable audio outputs from your  
stereo TV. Turn off or disconnect the TV’s speakers and leave the volume control up – close to  
the maximum setting.  
Note: If you connect your stereo VCR through your stereo TV, do not use coaxial cable.  
Instead, connect the VCR L and R audio outputs to the TV L and R audio inputs to ensure  
proper stereo and surround sound.  
Digital audio output  
Figure 11  
L
R
Connecting components  
through your TV  
Music center  
V
DVD player  
L
R
L
R
TAPE IN  
TAPE OUT  
L
R
V
L
R
VCR  
TV  
Cable TV  
To the module  
14  
October 29, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AM196575_05_V.pdf  
Setting Up  
About the video source  
Your TV is the display for the video (picture) signal. Thus, the video signal must be connected  
directly to the TV. Do not connect it to the Lifestyle® 25 system.  
Note: For assistance with video connections between your DVD player and/or VCR and TV,  
see your video components manuals.  
Note: There is no video signal input (usually a yellow-coded jack) on the music center. The  
VIDEO INPUT jacks are for audio from a video source.  
Other connections  
Use standard RCA audio cables to connect other components to your Lifestyle® music  
center, matching the red connector to R (right) and the white (or black) connector to L (left).  
You can use a Y-adapter (available at electronics stores) to connect a mono source.  
Tape deck  
To use an external recorder (analog audio cassette, MD, or digital audio tape), connect the  
inputs (REC) of the recorder to the music center’s TAPE OUT jacks. Connect the outputs  
(PLAY) from the recorder to the music center’s TAPE IN jacks.  
Laserdisc player or additional CD changer  
To use one of these components, connect its audio outputs to the music center VIDEO 1,  
VIDEO 2, or AUX (if not used for a digital source) jacks, matching the red plug to R (right) and  
black or white plug to L (left).  
Turntable  
To connect a turntable, you need a phono preamplifier (with RIAA equalization). You can order  
the appropriate model from Bose® by calling 1-800-367-4008 and asking for part number  
252603. Connect the audio outputs of the phono preamplifier to the music center VIDEO 1,  
VIDEO 2, or AUX (if not used for a digital source) jacks, matching the red plug to R (right) and  
black or white plug to L (left).  
Note: The Lifestyle® 25 system cannot turn on or turn off a connected component.  
AM196575_05_V.pdf  
October 29, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
Setting Up  
Connecting the antennas  
The rear panel of your Lifestyle® music center provides connections for AM and FM antennas  
(Figure 12). Unwind each antenna’s wires. Antennas provide better reception when their wires  
are not bundled.  
Note: Outdoor antennas may be used with the music center antenna connections. To install  
an outdoor antenna, consult a qualified installer. Follow all safety instructions.  
Figure 12  
The antenna connections  
L
R
L
R
TAPE IN  
TAPE OUT  
AM antenna jack  
FM antenna jack  
Figure 13  
FM antenna connections  
1. Plug the antenna connector into the FM ANTENNA jack on the back of the Lifestyle® music  
center.  
The FM dipole antenna  
2. Spread out the antenna arms. Experiment with both the placement and the angle of this  
antenna to provide optimum FM reception.  
AM antenna connections  
Note: To install the AM antenna on a wall, follow the instructions enclosed with the antenna.  
1. Plug the AM antenna connector into the AM ANTENNA jack on the back of the Lifestyle®  
music center.  
Figure 14  
The AM loop antenna  
2. Stand the loop antenna on the base, following the instructions enclosed with the antenna.  
3. Move the loop part of the antenna as far as possible but at least 20 inches (50 cm) from  
the music center and at least 4 feet (1.2 m) from the Acoustimass® module. Experiment  
with the orientation of the loop for optimum AM reception.  
Connecting to a cable radio signal  
To connect your system to the FM signal available from some cable TV companies, contact  
your cable provider for assistance. The connection is made to the FM 75Ω EXTERNAL  
antenna connector on the back of the system.  
CAUTION: Be certain that the installation includes a signal splitter so that only the FM band,  
not the cable TV band, is transmitted to the system. It is necessary to use a splitter that filters  
the signal to prevent any re-emissions of the TV spectrum through the system.  
16  
October 29, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AM196575_05_V.pdf  
Setting Up  
Installing the batteries in the remote control  
1. Slide open the battery compartment on the back of the remote (Figure 15).  
2. Insert 3 AA or IEC-R6 1.5V batteries, or the equivalent, as shown. Match the + and –  
symbols on the batteries with the + and – markings inside the compartment.  
3. Slide the battery compartment cover back into place.  
Replace the batteries when the remote control stops operating or its range seems reduced.  
Alkaline batteries are recommended.  
Note: Do not change the settings of the factory-preset miniature switches. See “Changing  
the house code settings” on page 32 for information on how to prevent conflicts with other  
Lifestyle® music systems.  
Figure 15  
Installing the remote control  
batteries  
3 AA batteries  
Battery compartment cover  
Miniature switches  
Setting radio channel spacing for dual voltage and 120V systems  
Dual voltage music centers (which include both 120V and 230V power packs) can be set for  
two types of AM and FM channel spacing.  
• 10 kHz for AM and 200 kHz for FM (common to North America)  
• 9 kHz for AM and 50 kHz for FM (common to Europe)  
Your dual voltage music center is preset for North American spacing. Select the channel  
spacing most appropriate for your area.  
To change between North American and European channel spacing:  
1. Turn the music center off.  
2. Press and hold the ERASE key (on the music center control panel) for three seconds. The  
display flashes PROGRAM and indicates US for North American spacing or Euro for  
European spacing.  
3. While holding the ERASE key, press SOURCE SELECT (on the music center control  
panel). The display flashes PROGRAM and the setting changes from US to Euro. While  
holding ERASE, press SOURCE SELECT again to change from Euro to US.  
AM196575_05_V.pdf  
October 29, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
®
Operating Your Lifestyle 25 System  
Turning on the music center  
Plug the Acoustimass® module power cord into an AC (mains) outlet. Then plug in the music  
center power pack.  
Note: Your speakers will not operate unless all cable and power connections are completed  
before turning on the music center.  
You are ready to enjoy your new Lifestyle® system. Open the music center by gently pressing  
upwards on the bottom of the door (Figure 16).  
Figure 16  
Opening the music center door  
Refer to the pages that follow for information on operating the music center controls and the  
Lifestyle® remote control.  
Play the Test CD, following the instructions on page 24. Listen to the instructions on the CD  
to verify your system setup.  
Note: If your system will be unattended for a few days, you may want to unplug your music  
center to prevent a neighbor’s Lifestyle® remote control or your pets from accidentally turning  
it on. Also see “Changing the house code settings” on page 32.  
The music center display  
This music center display (Figure 17) provides information on the music center functions.  
Zone 1 or 2  
indicator  
Figure 17  
Setting  
house  
codes  
CD elapsed time  
and AM/FM  
station frequency  
indicator  
CD track and  
The music center display  
No disc AM/FM preset  
indicator number display  
Stop  
indicator  
Source  
indicators  
indicator  
Mute  
indicator  
Play Pause  
indicator indicator  
Random play all  
discs or random  
play one disc  
indicator  
Disc indicators  
18  
October 29, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AM196575_05_V.pdf  
®
Operating Your Lifestyle 25 System  
The music center controls  
The music center function keys are described on page 20. Use the following special music  
center keys to tune the radio, set station presets, and scan a CD (Figure 18).  
TUNE  
/
- Lowers or raises the frequency setting of the radio (stations). In CD mode,  
initiates a fast scan of the current CD.  
STORE or ERASE - Adds or removes radio station presets. For instructions, see page 27.  
Also used for changing channel spacing (page 17) and house codes (page 32).  
Figure 18  
ON  
OFF  
/ II  
STORE  
ERASE  
SKIP  
The music center controls  
VOLUME  
PLAY/PAUSE  
SOURCE  
SELECT  
TUNE  
NEXT DISC  
®
The Lifestyle remote control  
The advanced radio-frequency remote control works from anywhere within most types  
of home construction. Its radio wave signals pass through walls and floors to reach the  
music center. Simply press the desired button. You do not need to aim the remote at the  
music center.  
Figure 19  
The remote control  
Note: Some types of buildings create “dead spots” where the remote will not operate. Simply  
move the remote a foot or two and try again. You can also move the music center a few feet to  
a location with better remote response.  
Figure 19 shows the layout of the remote control.  
Special buttons on the remote control select the speaker mode (5, 3, or 2 speakers), and  
adjust the surround (rear) volume and the center speaker volume.  
AM196575_05_V.pdf  
October 29, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
®
Operating Your Lifestyle 25 System  
The system controls  
Remote control  
Music center  
Function  
VIDEO 1 - Selects a video sound source connected to the VIDEO 1 inputs,  
and turns the system on. (See page 22.)  
VIDEO  
1
VIDEO 2 - Selects a video sound source connected to the VIDEO 2 inputs,  
and turns the system on.  
VIDEO  
2
AUX - Selects the DVD player (or other component connected to the AUX  
inputs) and turns the system on. Selects digital audio, if present.  
AUX  
CD  
CD - Selects the built-in CD changer and turns the system on.  
AM  
FM  
AM/FM - Selects the radio and turns the system on to the previously selected  
station. When the radio is on, switches between AM and FM.  
TAPE - Selects a tape deck or other component connected to the TAPE inputs,  
TAPE  
and turns the system on.  
SOURCE SELECT - Turns the system on to the previously selected sound  
source. When on, changes the source in this sequence CD, FM, AM, VIDEO 1,  
VIDEO 2, AUX, TAPE, CD.  
SOURCE  
SELECT  
ꢀ STOP - Stops the CD player. After 20 minutes, the system shuts off.  
PAUSE - Pauses play of the CD. After a 20-minute pause, changes to STOP.  
PLAY - Begins play of the CD.  
/ II  
/ II  
RANDOM (or  
SKIP plus SKIP  
) - In CD mode, begins random play of  
RANDOM  
all tracks on all discs. Pressed again, begins random play of tracks on the  
current disc. Pressed again, cancels random play.  
SSKKIIPP  
SKIP - Selects the previous CD track, or the previous preset radio station.  
Held down, initiates backward scan (CD) or seek (tuner) function.  
SKIP  
SKIP - Selects the next CD track, or the next preset radio station. Held  
SKIP  
down, initiates forward scan (CD) or seek (tuner) function.  
NEXT DISC - Advances to play the next disc loaded in the CD magazine.  
VOLUME ꢀꢀ\ꢀꢀ- Raises or lowers the system volume.  
MUTE - Silences the speakers in the selected zone. Also restores volume to  
MUTE  
muted speakers in the selected zone.  
MUTE ALL - Silences all speakers currently playing. Also restores sound to  
speakers silenced by the MUTE ALL key.  
MUTE  
ALL  
ON  
ON/OFF - Turns the system on and off.  
ON  
OFF  
OFF  
Note: For information on controlling the system from different zones, see “Using two listening zones” on page 30.  
20  
October 29, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AM196575_05_V.pdf  
®
Operating Your Lifestyle 25 System  
Additional system controls  
Remote control  
Function  
SURROUND  
• Press and release to select SURROUND (5-speaker) mode for all sources.  
• Press and hold for 3 seconds to engage (1 chime) or disengage (2 chimes) simulated surround for  
monoaural program sources.  
SURROUND  
• Press and hold for 8 seconds to restore (3 chimes) factory settings for speaker mode and surround  
volume level.  
STEREO+CENTER  
• Press and release to select STEREO+CENTER (3-speaker) mode for all sources.  
• Press and hold for 8 seconds to restore (3 chimes) factory settings for speaker mode and center  
volume level.  
STEREO+CENTER  
STEREO  
• Press and release to select STEREO (2-speaker) mode for all sources.  
• Press and hold to engage (1 chime) or disengage (2 chimes) Digital Dynamic Range® compression.  
STEREO  
SURROUND + / –  
• In SURROUND (5-speaker) mode, raises or lowers volume of surround speakers.  
• In STEREO+CENTER (3-speaker) mode, raises or lowers volume of center speaker.  
• In STEREO (2-speaker) mode, + selects the SURROUND mode.  
SURROUND  
Note: The adjustments made with SURROUND + and – will be remembered even if you select another  
speaker mode.  
Note: If you set the master volume level very high or very low, a built-in feature automatically  
resets it to a moderate threshold level the next time the system is turned on.  
Note: To restore all factory default settings, turn power off then on, press and hold the  
SURROUND  
(5-speaker) until you hear the 3-chime confirmation tone, then press and  
SURROUND  
hold the STEREO+CENTER  
(3-speaker) until you hear the 3-chime confirmation tone.  
STEREO+CENTER  
AM196575_05_V.pdf  
October 29, 2001  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
Operating Your Lifestyle 25 System  
®
Listening to your Lifestyle 25 system  
Your Lifestyle® 25 system uses digital signal processing to bring even greater realism and  
impact to both movies and music recordings. Built-in Dolby Digital decoding delivers up to  
5.1 discrete audio channels (i.e., five for the independent cube speaker arrays and one for  
rich bass from the Acoustimass® module) from DVD, digital TV, next-generation cable boxes,  
and satellite receivers. With analog formats, as well as for two-channel PCM and Dolby  
Digital bitstreams, Videostage® decoding directs stereo information to the surround channels,  
so the sound of stereo broadcasts and rented or recorded tapes can approach that of your  
DVD discs.  
In addition, Videostage decoding processes a one-channel program and directs five-channel  
sound to five independent speakers. Dialogue remains locked on-screen, while music and  
ambient effects fill the room to increase your listening enjoyment.  
Your Lifestyle® 25 system offers the option of listening in 5, 3, or 2-speaker mode. The system  
turns on in SURROUND (5-speaker) mode. For most video material (mono, stereo, or sur-  
round), listening in 5 or 3-speaker mode helps anchor the dialogue to the picture while  
providing a fuller sound.  
Using enhanced mode for movie soundtracks  
Pressing VIDEO 1, VIDEO 2, or AUX turns the system on in enhanced mode, with bass and  
treble settings specially designed for proper playback of movie soundtracks. Press the same  
button (VIDEO 1, VIDEO 2, or AUX) again to alternate between enhanced mode for movies  
and standard mode for other listening. Pressing TAPE turns the system on in standard mode.  
Press TAPE again to alternate between enhanced mode for movies and standard mode for  
other listening.  
Note: Enhanced mode provides more bass and less treble, as is specified for proper  
playback of movie sound.  
®
Digital Dynamic Range compression  
Digital Dynamic Range® compression automatically adjusts the volume to allow you to hear  
soft sounds (particularly dialogue) and to prevent you from being overwhelmed by a loud  
special effect (e.g., an explosion). This feature is engaged when you turn on the system, but  
you may turn it on (one chime) or off (two chimes) using the STEREO  
(2-speaker) button.  
STEREO  
Using simulated surround for mono movie material  
Bose® Videostage decoding can process a one-channel program into five-speaker sound –  
directing the signals so that dialogue remains locked on-screen, while music and ambient  
effects fill the room. You experience a surround sensation, providing extra enjoyment when  
you watch older (i.e., pre-stereo) movies. This feature can be used for mono TV, FM, and AM  
programs. Press the SURROUND  
(5-speaker) button to turn it on (one chime) or off (two  
SURROUND  
chimes). This feature is automatically engaged when a Dolby Digital bitstream indicates that it  
contains a mono program.  
22  
October 29, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AM196575_05_V.pdf  
®
Operating Your Lifestyle 25 System  
Operating the special features  
Please see the previous page for a more detailed explanation of these special features.  
Enhanced mode  
When you select  
The mode is  
To change this  
VIDEO 1, VIDEO 2, or AUX  
Enhanced  
Press the same button again  
TAPE  
Standard  
Standard  
Press the same button again  
CD or AM/FM  
Not applicable: You cannot select  
enhanced mode for CD or AM/FM  
®
Digital Dynamic Range compression  
When you select  
Compression is  
To change this  
VIDEO 1, VIDEO 2, or AUX  
ON  
Press and hold the STEREO  
button until two chimes are heard  
(2-speaker)  
(2-speaker)  
STEREO  
CD, AM/FM, or TAPE  
OFF  
Press and hold the STEREO  
STEREO  
button until one chime is heard  
Simulated surround (monaural into 5 speakers)  
When your audio source is  
Simulated surround is To change this  
Mono Dolby Digital  
ON  
Press and hold the SURROUND  
(5-speaker)  
SURROUND  
button until two chimes are heard (OFF)  
Anything else  
OFF  
Press and hold the SURROUND  
(5-speaker)  
SURROUND  
button until one chime is heard (ON)  
To return speaker levels to factory settings  
To reset  
Center speaker level  
Press  
STEREO+CENTER  
(3-speaker) button until you hear a 3-note chime  
STEREO+CENTER  
Surround (rear) speakers level  
SURROUND  
(5-speaker) button until you hear a 3-note chime  
SURROUND  
Chimes  
When you hear one or more chimes, it means that one of the system features has been turned on or off.  
What the chimes mean  
When you hear  
This means  
1 chime  
Simulated surround (monaural into 5 speakers)  
or Digital Dynamic Range compression has been turned ON  
2 chimes  
3 chimes  
Simulated surround (monaural into 5 speakers)  
or Digital Dynamic Range compression has been turned OFF  
Surround speaker level or Center speaker level has  
been restored to factory default settings  
AM196575_05_V.pdf  
October 29, 2001  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
Operating Your Lifestyle 25 System  
Listening to digital sound  
Turning on the digital audio source  
Turn on the DVD player, DTV, or other digital audio source. Load the DVD disc.  
Turning on the system and choosing digital sound  
Press AUX to turn your system on to play digital sound. If your Lifestyle® system does not  
receive a valid PCM or Dolby Digital bitstream, it will automatically select the analog signal  
connected to the music center AUX jacks.  
Selecting listening material  
To select material with compatible digital-audio bitstreams, look for the terms PCM or Dolby  
Digital, or the symbol  
1
on DVD-Video discs. Your Lifestyle® 25 system cannot process  
MPEG-2 or DTS digital bitstreams. Make sure a connection is made between your DVD  
player or Digital TV’s digital audio output and your system’s digital audio input.  
To select surround-encoded analog or digital audio material, look for the terms Surround or  
Dolby Surround, the symbol  
3
on tapes and discs, or the word “surround” preced-  
ing a TV broadcast. You can listen to any program material in SURROUND (5-speaker) mode,  
though you may not hear sound from all five speakers all the time. Some monaural and stereo  
materials will not cause sound to be directed to the surround speakers. Even with surround-  
encoded material there are times when no sounds are directed to the surround speakers.  
Listening to compact discs  
Using the CD changer  
You can load up to six compact discs at a time.  
Loading discs into the CD magazine  
Hold the magazine, looking at the side with the arrow. Insert up to six discs, label side up  
(Figure 20). Take care to place only one disc in each slot. Note the slot numbers 1 through 6,  
from bottom to top, on the front edge window. These numbers correspond to the CD num-  
bers on the display.  
Note: If a disc is upside-down, it does not play. The display shows the word “disc” and  
flashes the box representing that disc.  
CAUTION: Do not insert more than one disc into any slot. Forcing two discs into one slot  
could cause them to become stuck, and could damage the discs, the CD magazine, or the  
music center.  
Figure 20  
Loading a CD  
6
5
4
3
2
1
6
5
4
3
2
1
6
D
IS  
K
M
A
G
A
Z
IN  
E
24  
October 29, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AM196575_05_V.pdf  
®
Operating Your Lifestyle 25 System  
Ejecting discs from the CD magazine  
Press the white lever that corresponds to the disc you want to eject. This ejects the disc far  
enough for you to grasp the edge and remove it from the magazine (Figure 21).  
Figure 21  
Ejecting a CD  
Loading the CD magazine into the music center  
Open the music center door. Insert the CD magazine fully into the music center, following the  
direction of the arrow on the magazine (Figure 22).  
Figure 22  
Loading the CD magazine  
THIS DIRECTION  
IN  
T
INSER  
E
IN  
Z
A
G
Ejecting the CD magazine from the music center  
Press the EJECT button, at the lower left of the magazine slot, to remove the magazine  
(Figure 23). If a CD is playing, pressing the EJECT button stops the CD, replaces it in the  
magazine, and ejects the magazine.  
Figure 23  
The CD magazine EJECT  
button  
6
5
4
3
2
1
E
IN  
Z
A
G
A
M
C
IS  
D
6
T
C
JE  
E
EJECT button  
AM196575_05_V.pdf  
October 29, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
®
Operating Your Lifestyle 25 System  
Turning on the system and choosing the CD player  
Press the CD key on the remote or press SOURCE SELECT on the music center until CD is  
selected. If the system is already on, use one of these keys to select the CD player. The CD  
indicator on the display lights. If a CD has been loaded, it begins to play.  
Note: Selecting CD turns the system on in SURROUND (5-speaker) mode. Press  
STEREO+CENTER  
(3-speaker) or STEREO  
(2-speaker) to change the mode.  
STEREO+CENTER  
STEREO  
CD operations  
If you want to  
Press  
Play or resume play of a CD  
Pause a CD  
PLAY, or / II PLAY/PAUSE  
PAUSE, or / II PLAY/PAUSE  
ꢀꢀSTOP, or select another source  
Stop a CD  
Go to next track  
SKIP  
SKIP  
SKIP  
(forward)  
Go to beginning of current track  
Go to previous track  
(reverse) after 4 seconds of track play  
within the first four seconds of the track.  
After four seconds, press SKIP  
twice to go to the  
previous track. In RANDOM mode, skips to previous  
track played.  
Play another disc  
NEXT DISC  
In PLAY mode, selects discs in order, 1 through 6,  
then back to 1; in RANDOM mode, randomly selects  
another disc. The music center skips empty disc  
slots.  
Scan a CD  
Press and hold SKIP  
RANDOM, or SKIP  
or  
plus  
plus  
, or TUNE  
or  
Randomly play tracks on all discs  
Randomly play tracks on one disc  
(on the music center)  
(on the music center),  
RANDOM, or SKIP  
a second time  
Cancel random play  
RANDOM, or SKIP  
plus  
(on the music center),  
a third time; press ꢀ STOP; or select another source  
Note: To prevent excessive wear on the CD mechanism, unattended CD play or random  
play operations change to STOP after 24 hours. If you want to leave the music center playing  
unattended for longer than 24 hours, you can use the radio.  
Figure 24  
The music center display provides the following information about the CD changer functions  
(see sample display in Figure 24):  
Display of CD playing in zone 1:  
Disc 3, track 8, 2 minutes and  
45 seconds played, 6 CDs are  
loaded, and random play for all  
discs is selected  
• Which CD is playing, paused, or stopped, or NONE if no disc is installed  
• How much time the current CD has played  
• Which track is playing  
• If RANDOM ALL DISCS or RANDOM (one disc) is selected  
• Which slots have been scanned and have discs loaded  
- Numbers in boxes represent discs in slots.  
- Empty boxes indicate disc slots that have not yet been scanned by the music center.  
- Blank spaces indicate empty slots (or discs that cannot be loaded).  
- A flashing box indicates the disc is upside down or cannot be read.  
26  
October 29, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AM196575_05_V.pdf  
®
Operating Your Lifestyle 25 System  
Listening to the radio  
Turning the system on and choosing the radio  
Press the AM/FM key on the remote or the music center to turn your music system on to the  
most recently heard AM or FM station. The system turns on in SURROUND mode. Select  
another speaker mode, if desired.  
Note: If the system is on and the radio is already selected, this key switches between the  
AM and FM bands.  
Tuning  
Seeking the strongest stations  
• Press and hold SKIP  
(forward) or  
(reverse) to start seeking. Release the key to stop  
at the next strong signal.  
• To stop seeking sooner, briefly press SKIP or ꢀꢀSTOP.  
• You can seek again without holding down the SKIP key. As soon as the first seek opera-  
tion stops, briefly press the SKIP  
or  
key.  
Switching between AM and FM  
Press the AM/FM key to switch to the other band.  
Manual tuning  
To tune to a distant or weak station that the radio cannot seek, use TUNE  
music center.  
or  
on the  
Setting a station preset  
Your Lifestyle® music center can store up to 25 AM and 25 FM stations in any combination.  
Note: To allow for different station preferences, you can reserve a group of preset numbers  
for each household member. Any station can be assigned to more than one preset number.  
Or, you can reserve different number groups for different types of stations. For easy refer-  
ence, you may want to keep a written record of your presets.  
1. Lift the music center door.  
2. Select a radio station you want to store as a preset, either by tuning manually or by  
pressing and holding a SKIP key.  
3. Press the STORE key. The lowest available preset number flashes for three seconds, then  
is set and displayed.  
4. If you prefer a different preset number, while the number is flashing press either SKIP key  
to select another available preset number. The preset number is displayed.  
Note: You cannot store a station in an already-occupied preset location without erasing that  
preset station first (see “Erasing a preset station” below). If you attempt to store more than 25  
AM or 25 FM stations, the preset display will flash ‘— —’.  
Selecting a preset station  
Figure 25  
Once you have set station presets, press SKIP  
or  
to select the next or the previous  
preset station. See Figure 25 for a sample display of a preset FM station.  
FM display showing a preset  
station  
Erasing a preset station  
1. Lift the music center door.  
2. Select the preset station you want to erase.  
3. Press the ERASE key.  
AM196575_05_V.pdf  
October 29, 2001  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
Operating Your Lifestyle 25 System  
Using the system with external components  
Follow the instructions on pages 12-15 for connecting components.  
Turn on your component directly or by using its remote control. Use the VOLUME ꢀ or ꢀ  
button on the Lifestyle® remote control or music center to raise or lower the volume. Control  
all other functions at the source, referring to its owner’s manual, if necessary. To begin, make  
sure the component is turned on and a tape, CD, DVD, laserdisc, etc. is loaded.  
Note: The Lifestyle® 25 system cannot turn a connected component on or off.  
Turning the system on and selecting the component  
Press the TAPE, AUX, VIDEO 1, or VIDEO 2 button on the remote or press SOURCE SELECT  
on the music center until the desired component is selected. This turns your system on and  
selects the component connected to that input. If the system is already on, this button  
selects the component.  
Note: Selecting a source turns the system on in SURROUND (5-speaker) mode. Press  
STEREO+CENTER  
(3-speaker) or STEREO  
(2-speaker) to change the mode.  
STEREO+CENTER  
STEREO  
The appropriate display indicator lights when the system is on and the component is selected.  
Using a video sound source  
Press VIDEO 1 or VIDEO 2 on the remote or SOURCE SELECT on the music center until  
VIDEO 1 or 2 appears on the display. This turns your system on in SURROUND (5-speaker)  
mode and selects the video sound source connected to the VIDEO 1 or 2 jacks.  
If your video component is connected to the music center TAPE jacks, press TAPE on the  
remote or SOURCE SELECT on the music center until TAPE appears on the display. This  
turns your system on in SURROUND (5-speaker) mode and selects the source connected to  
the TAPE jacks.  
Using enhanced mode for movie soundtracks  
When a movie soundtrack is played in a motion picture theater, its bass and treble are  
restored to the original levels intended by the movie’s sound designer. To re-create the same  
performance in your home, your Lifestyle® 25 system’s enhanced mode restores the bass and  
treble to these levels when you select VIDEO 1, VIDEO 2, or AUX.  
When VIDEO 1, VIDEO 2, or AUX is selected, you can also choose between standard and  
enhanced modes. The system turns on in enhanced mode for movies. Press the same button  
(VIDEO 1, VIDEO 2, or AUX) again to change to standard mode. When TAPE is selected, the  
system turns on in standard mode. Press TAPE again to change to enhanced mode for  
movies.  
Note: You may not hear a difference between enhanced and standard modes when listening  
to dialogue or other program material that does not have much bass or treble.  
Using a tape deck  
To record to a connected tape deck, play the source (AM/FM, CD, AUX, VIDEO 1 or 2) you  
want to tape. In a 2-zone system, play the source in zone 1. Set the tape deck to record.  
Using headphones  
For headphone listening, use the stereo mini headphones jack on the side of the music center  
(Figure 26). While this jack accepts most headphone models, you can get an adapter at  
Bose® dealers and most electronics stores, if needed.  
Figure 26  
Connecting headphones  
Connecting headphones silences the speakers connected to SPEAKER ZONE 1.  
28  
October 29, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AM196575_05_V.pdf  
®
Maintaining Your Lifestyle 25 System  
Fine-tuning your system  
In most situations, following the speaker placement guidelines (see pages 6-8) provides  
excellent sound quality.  
Figure 27  
You do not need to adjust tone settings for changes in volume, since Bose® patented signal  
processing technology provides a natural tonal balance over the full range of volume settings.  
Bass and treble controls  
If desired, you can further fine-tune your system as described below.  
Adjusting speaker controls  
The Lifestyle® 25 system TREBLE and BASS controls are located on the Acoustimass®  
module (Figure 27). They allow you to adjust the treble (high frequencies) and bass (low  
frequencies). In the normal setting, the dots on each control are in the 12 o’clock position.  
You can also locate the normal setting by feeling when the control settles into the notch at  
this position. Turn the controls clockwise to increase, and counterclockwise to decrease, the  
amount of treble or bass.  
®
Compensating for room acoustics  
The acoustics (sound qualities) of your room can affect the overall sound quality of any  
speaker system. In general, you can reduce many problems with acoustics by the cautious  
use of the TREBLE and BASS controls.  
T
re  
b
le  
B
a
s
s
Too much or too little treble  
Rooms with too few sound-absorbing furnishings, especially those with bare floors and walls,  
may sound overly shrill or “bright.” Turning down the treble control (toward –) decreases  
treble sound.  
Rooms with a lot of sound-absorbing furnishings, such as upholstered furniture, wall-to-wall  
carpet, or heavy drapes, may reduce the treble sound of your system. Moving speakers  
farther away from soft furnishings increases treble. You can increase treble sound by slightly  
turning up the treble control (toward +).  
Too much or too little bass  
You can decrease bass sound by turning down the bass control (toward –). To increase bass,  
turn up the bass control (toward +).  
Acoustimass module placement affects the amount of bass you hear. Placing the module  
closer to the corner of the room will increase bass. Moving the module away from the corner  
will decrease bass.  
AM196575_05_V.pdf  
October 29, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
®
Maintaining Your Lifestyle 25 System  
Using two listening zones  
The Lifestyle® 25 system can direct sound from one or two sound sources to two different  
listening areas at the same time. Each listening area, whether a room or a group of rooms  
(including outdoor areas), is referred to as a zone. By adding powered speakers and a  
second remote, you can establish two listening zones (Figure 28).  
Figure 28  
Example of two listening zones:  
the Lifestyle® 25 speakers in  
zone 1 and Acoustimass®  
powered speaker system in  
zone 2  
How zones work  
• Zones 1 and 2 can play the same or different sound sources at the same time – CD, AM/  
FM tuner, TAPE, VIDEO sound, or AUX.  
• Only one radio station can be played at a time.  
Setting up two zones  
• The Lifestyle® 25 speakers are set up in zone 1.  
• Any combination of rooms and floors in your home can be set up as zones.  
• Use an appropriate Lifestyle® system cable to connect a second Bose® powered speaker  
Living  
room  
system to the SPEAKER ZONE 2 jack on the back of the music center.  
Bedroom  
Zone 1  
Zone 2  
• You can also use special adapters to connect an existing stereo system.  
• Use a second Lifestyle® system remote control to operate zone 2.  
See your dealer or contact Bose for information on obtaining additional powered speakers,  
remote controls, cables, and adapters for connecting additional equipment.  
Setting a second remote for zone 2  
You need a second remote control, set to ZONE 2, to operate speakers connected to the  
ZONE 2 output.  
To set your second remote to control speakers in the second zone, follow these steps:  
1. Open the remote control battery cover.  
2. Locate miniature switch 8 (Figure 29). If it is set down for ZONE 1, slide it up for ZONE 2,  
using a paper clip, ballpoint pen, or similar object.  
3. Make sure the house code switches (1, 2, 3, and 4) match those on your first remote.  
(See page 32 for more information on house codes.)  
4. Replace the battery cover.  
ZONE 1 – switch 8 down  
ZONE 2 – switch 8 up  
Figure 29  
40  
40  
K
K
ON  
ON  
Speaker code switch settings  
l 2 3 4 5 6 7 8  
l 2 3 4 5 6 7 8  
Zone 1 remote  
Zone 2 remote  
30  
October 29, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AM196575_05_V.pdf  
®
Maintaining Your Lifestyle 25 System  
Operating two listening zones  
Controlling the zones from the remote controls  
To control two zones, you need to have a remote set to each zone. See instructions on  
page 30 for setting a second remote to zone 2.  
• You can select and control sources in each zone by commands from its remote control.  
• You can control the volume in each zone directly from its remote control.  
• You can turn each zone on and off directly from its remote control.  
• You can listen to the same source in both zones.  
Controlling the zones from the music center control panel  
Turning two zones on and off from the music center involves a sequence of actions.  
• To turn zone 2 on from the music center, press and hold the ON/OFF key. Watch the  
display to see which zone is on or off. Release the key to keep the option shown.  
Holding the ON/OFF key causes this repeating sequence:  
zone 1  
ON  
zone 2  
OFF  
First  
Second  
Third  
ON  
OFF  
ON  
ON  
• To turn the zones on or off from the music center when both zones are on, press the ON/  
OFF key for the following sequence:  
zone 1  
ON  
zone 2  
ON  
First press  
Second press  
Third press  
Fourth press  
Additional presses  
OFF  
OFF  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
zone 1 repeats ON and OFF  
• When zone 1 is on (even if zone 2 is also on), the music center keys control zone 1 only.  
• When zone 2 is the only zone on, the music center keys control zone 2.  
• If you press SOURCE SELECT for FM or AM while zone 2 is playing the other radio band,  
the band selected in zone 2 flashes on the display. If you do not want to change the band  
playing in zone 2, use SOURCE SELECT to choose another source within two seconds.  
The music center display of zone information  
• When zone 1 or both zones are on, the display shows zone 1 information.  
• When only zone 2 is on, the display shows zone 2 information.  
AM196575_05_V.pdf  
October 29, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
®
Maintaining Your Lifestyle 25 System  
Changing the house code settings  
Each Lifestyle® remote control uses a system of matching house codes to communicate with  
its corresponding music center. If your remote’s commands ever conflict with those of  
another nearby Lifestyle® system, you can easily set a new house code for your system and  
its remote control(s) by following the procedures below.  
1. Open the remote control battery cover and locate the miniature switches (Figure 30).  
2. To create a new code, change the position of switches 1, 2, 3, or 4 by moving them in the  
opposite direction from their current settings. Use a paper clip, ball point pen, or similar  
object.  
Note: Do not change switches 5, 6, or 7 at this time. The manufacturer’s standard setting is  
switch 5 up and switches 6 and 7 down.  
3. Replace the battery cover.  
Figure 30  
Miniature switches for setting  
house codes and zones  
House code switches  
40  
K
ON  
l
2
3
4
5
6
7
8
4. Lift the music center door.  
5. Turn both zones off.  
6. Press and hold the STORE key. The display will begin to flash PROGRAM.  
7. While you hold the STORE key and the display is flashing, press any key on the remote  
control.  
Figure 31  
• The display stops flashing and momentarily shows PROGRAM to confirm recognition of a  
Display confirming an example  
of house code setting switch 1  
up, switches 2, 3, and 4 down  
new house code.  
• The display verifies the house code by lighting four rectangles corresponding to the four  
switch positions (up or down). See the example in Figure 31.  
8. Release the STORE key. The system remains off.  
9. If you have additional remote controls, change the switches to match those of the first  
remote control. It is not necessary to repeat steps 4-8.  
Note: To verify your system’s house code, press STORE while the system is off. The display  
confirms the settings of switches 1-4.  
32  
October 29, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AM196575_05_V.pdf  
®
Maintaining Your Lifestyle 25 System  
®
Taking care of your Lifestyle 25 system  
The only maintenance needed is cleaning the system and your compact discs, and replacing  
remote control batteries.  
For information on replacing the remote control batteries see “Install the batteries in the remote  
control” on page 17.  
Handling CDs  
Handle discs by their edges to prevent fingerprints and scratches (Figure 32).  
Figure 32  
Handling a CD  
To remove stains or fingerprints from the surface of a disc, use a soft, lint-free, dry cloth. Wipe  
in straight movements from the center of the disc to the outside (Figure 33). Do not use any  
chemical products; they can damage the disc.  
Do not write on or attach labels to the surface of the disc.  
To minimize exposure to dust and dirt, replace discs in their cases after use. Store each disc  
in its case, out of direct sunlight, high temperatures, and humidity.  
Cleaning the music center  
Use only a soft, dry cloth to clean the outside of the music center.  
Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or  
abrasives. Do not allow liquids to spill into any openings. Do not use any sprays near the  
system.  
Figure 33  
Cleaning a CD  
Cleaning the speakers  
Clean the surface of your speakers with a soft, damp cloth. You can use an ammonia-free  
window cleaner on a soft cloth to maintain the finish.  
Do not use any sprays near the system. Do not use any solvents, chemicals, or cleaning  
solutions containing alcohol, ammonia, or abrasives. Do not allow liquids to spill into any  
openings.  
The speaker grille panels require no special care, although you may vacuum them carefully, if  
necessary.  
Transporting your music center  
To transport your music center, follow these steps to lock down the CD mechanism.  
1. Eject the CD magazine.  
2. Make sure the music center is off (all zones).  
3. On the music center, press STORE, ERASE, and PLAY/PAUSE at the same time. Then  
release.  
4. Press and hold the EJECT button for 10 seconds. The CD elevator moves into locked  
down position.  
5. If you hear the elevator continue to move up and down, wait 10 seconds and then repeat  
steps 3 and 4.  
The CD mechanism unlocks automatically the next time you select CD.  
AM196575_05_V.pdf  
October 29, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
®
Maintaining Your Lifestyle 25 System  
Troubleshooting  
Problem  
What to do  
System does not function  
at all  
• Make sure the power connector is inserted securely into the music center, the power cord  
is inserted securely into the Acoustimass® module, and the power pack and power cord are  
plugged fully into operating AC wall outlets.  
• Be sure to select a source (CD, AM/FM, etc.).  
• Unplug the music center power pack for a minute, then reconnect it. This allows the unit to  
reset itself after a power surge or power interruption.  
• If the system is not responding, press STORE, ERASE, and ON/OFF (on the music center)  
at the same time, to reset the system.  
No sound  
• Increase the volume.  
• Check to see if MUTE is lit on the display. If it is, press the MUTE button on the remote  
control to unmute the sound.  
• Make sure the audio input cable is firmly seated in the music center SPEAKER ZONE 1  
jack and the multi-pin connector on the other end is firmly seated in the Acoustimass  
module AUDIO INPUT jack.  
• Check speaker connections.  
• Make sure the digital audio input cable is firmly seated in the music center AUX jack and the  
other end of the cable is firmly seated in the connector at the digital source.  
• Turn the music center off for 10 seconds, then on again, to restore communication between  
the music center and the speakers.  
• Check the connections for any external components. Make sure to select the correct  
source for the desired input.  
• Be sure the CD is placed correctly, label-side up, in the magazine, and the magazine is  
inserted properly in the music center.  
• Disconnect any headphones.  
• Connect the FM and AM antennas.  
No sound from  
center speaker  
• Make sure the center cube cable is connected at both ends.  
• Select STEREO+CENTER  
(3-speaker) or SURROUND  
(5-speaker) mode.  
SURROUND  
STEREO+CENTER  
Too much sound  
from center speaker  
• In STEREO+CENTER (3-speaker) mode, press SURROUND  
volume.  
–
to decrease center speaker  
• Press and hold the STEREO+CENTER  
(3-speaker) button for 10 seconds to  
STEREO+CENTER  
restore the factory preset center volume setting.  
No sound from  
surround speakers  
• Select SURROUND  
• Press SURROUND  
• Press and hold the SURROUND  
(5-speaker) mode.  
SURROUND  
+.  
(5-speaker) button for 10 seconds to restore the  
SURROUND  
factory preset surround volume setting.  
• Make sure the video sound source is stereo and surround-encoded, and the component  
used (TV, VCR, DVD or laserdisc player) is stereo.  
Surround speakers  
are too loud  
• In SURROUND (5-speaker) mode, press SURROUND  
–
.
• Make sure that the left and right front speakers are connected to the front speaker jacks  
(blue) and the left and right surround speakers are connected to the surround speaker  
jacks (orange).  
• Press and hold the SURROUND  
(5-speaker) button for 10 seconds to restore the  
SURROUND  
factory preset surround volume setting.  
34  
October 29, 2001  
AM196575_05_V.pdf  
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
Maintaining Your Lifestyle 25 System  
Problem  
What to do  
Remote control  
is inconsistent  
or does not work  
• Check batteries and their polarity (+ and –). See page 17.  
• Operate the remote control closer to the music center.  
• Move the remote (or the music center) a few feet to avoid an area of “dead spots.” See  
note on page 19.  
• Make sure the audio input cable is firmly seated, uncoiled, and extended as much as  
possible.  
• Make sure the remote control and music center house codes match. Follow steps 4-8 on  
page 32 to match the house code settings.  
Unit turns on  
and off by itself,  
or behaves erratically  
• Change the house code setting to prevent signals from conflicting with another nearby  
Lifestyle® system. See page 32 for instructions on setting the house code.  
Radio does not work  
• Make sure antennas are connected properly.  
• Move AM antenna at least 20 inches (50 cm) from the music center.  
• Adjust antenna position to improve reception.  
• AM antenna must be upright.  
• Move antennas farther from TV or other electronic equipment.  
• You may be in an area of weak signal coverage.  
CD does not play  
• Check to see if the play symbol  
in the display is lit.  
• After pressing the CD key, wait a few seconds before pressing PLAY.  
• Make sure the magazine is properly inserted.  
• Check to see if there is a disc in the magazine, label-side up. Display shows a flashing box  
for a disc that is label-side down or cannot be read.  
• Eject the magazine and try loading the CD again.  
• There may be dirt or dust on the CD. Clean the CD. See Figure 33 on page 33.  
• The disc may be defective. Try another disc.  
• A display message “E01” indicates a mechanical error. Unplug the music center. Reconnect  
power and try again. If “E01” reappears, call Bose® customer service (see inside back cover  
for listings).  
FM sound is distorted  
• Adjust antenna position to reduce interference.  
FM sound is noisy in  
surround mode  
• Weak FM stations will produce static in the surround speakers. Press the STEREO  
(2-speaker) button to minimize noise.  
STEREO  
Sound is distorted  
• Make sure speaker cables are not damaged and the connections are secure.  
• Reduce the output level from any external components connected to the music center.  
No tape, CD, VCR,  
or TV sound  
• Check the connections.  
• Make sure the component is turned on.  
• Refer to the component owner’s manual.  
Warranty period  
The Bose Lifestyle® 25 system is covered by a limited 1-year transferable warranty. Details of  
the warranty are provided on the warranty card that came with your system. Please fill out the  
information section on the card and mail it to Bose.  
Customer service  
For additional help in solving problems, contact Bose customer service. See the inside back  
cover for Bose Corporation customer service offices and phone numbers.  
AM196575_05_V.pdf  
October 29, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35  
Product Information  
Technical information  
Music center power pack  
power rating  
Remote control range  
65 feet (20 m)  
USA/Canada: 120V~ 60 Hz 25VA  
Europe: 230V~ 50 Hz 25VA  
Australia: 240V~ 50 Hz 25VA  
Dimensions  
Music center  
15.5" W x 8.0" D x 2.6" H  
(39.4 cm x 20.3 cm x 6.6 cm)  
Dual voltage: 120V~ 60 Hz 25VA and  
230V~ 50 Hz 25VA  
Cube speaker  
Speaker system power rating  
USA/Canada: 120V~ 50/60 Hz 350W  
3.1" W x 4.0" D x 6.2" H  
(7.8 cm x 10.2 cm x 15.7 cm)  
Acoustimass® module  
Europe/Australia: 220-240V~ 50/60 Hz 350W  
Dual voltage: 115/230V~ 50/60 Hz 350W  
23.3" W x 7.5" D x 14.0" H  
(59.0 cm x 19.0 cm x 35.5 cm)  
Music center inputs  
TAPE: 2Vrms, maximum  
AUX, VIDEO: 2Vrms, maximum  
FM antenna: 75Ω  
Weights  
Music center  
5.9 lb (2.7 kg)  
Cube speaker  
2.4 lb (1.1 kg)  
AM antenna: 12µH  
Power: 12V~, 1.3A  
Acoustimass module  
33 lb (15.0 kg)  
Total shipping weight  
65 lb (29.5 kg)  
Music center outputs  
Variable audio: SPEAKER ZONES 1 and 2  
Fixed audio: ZONE 1, ZONE 2, TAPE  
Headphone: 32Ω minimum impedance  
SERIAL DATA: for future use  
Finish  
Music center  
Zone connector pinout:  
1: variable left audio  
2: variable right audio  
3: fixed left audio  
4: fixed right audio  
5: audio ground  
8
7
6
Aluminum  
5
4
3
Cube speakers  
Polymer, painted  
Acoustimass module  
Vinyl veneer, Polymer  
2
1
6: +10V control line  
7: SMART SPEAKER data  
8: control line ground (and remote antenna)  
Accessories  
To find out about mounting brackets, stands, CD magazines, additional remote controls,  
and connecting additional Bose® powered loudspeakers, contact your Bose dealer. Or call  
Bose directly (see inside back cover for phone numbers).  
36  
October 29, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AM196575_05_V.pdf  
Index  
A
mega-bass 13, 14  
moisture 2  
mono 4, 12, 15, 23  
mounting brackets 36  
movie soundtracks 22, 28  
MPEG-2 4, 24  
multi-pin connector 10, 34  
music center 2-5, 8-12,15, 16,  
18-21, 25-28, 30-36  
music center door 18  
MUTE 20, 34  
distorted 35  
Dolby Digital 4, 12, 22, 24  
Dolby Surround 4, 24  
DTS 4, 24  
AA 5, 17  
AC POWER 11  
AC power cord 5, 11  
AC power pack 5, 10, 11  
accessories 36  
DTV 12, 24  
dual voltage 5, 11, 17, 36  
DVD 4, 8, 12-14, 24, 28  
Digital Dynamic Range® compression  
4, 21-23  
acoustic image 6  
Acoustimass® module 2-11, 16, 18,  
29, 34, 36  
AM antenna 5, 16, 34, 35, 36  
AM/FM 4, 20, 22-24, 27, 28, 34  
analog 4, 12, 13, 15, 22, 24  
ANTENNA 16  
antenna 5, 16, 34, 35, 36  
audio cable 12, 13  
AUDIO INPUT 10, 34  
audio input cable 5, 8, 10, 34  
audio tapes 8  
E
E01 35  
EJECT 33  
eject 25  
encoded 12, 24  
enhanced mode 22, 23, 28  
ERASE 27, 33, 34  
error 35  
mute 18  
MUTE ALL 20  
N
NEXT DISC 20, 26  
NONE 26  
North America 11, 17  
EU 17  
O
Australia 5, 11, 36  
AUX 12, 13, 20, 22, 28, 30, 36  
Europe 5, 11, 17, 36  
expanded stereo 13, 14  
external antenna 16  
1 chime 21-23  
115/230V 36  
115V 11  
B
barrel connector 9  
BASS 29  
batteries 2, 5, 17, 33, 35  
F
120V 11, 17, 36  
ON/OFF 31, 34  
one chime 21-23  
one-channel 22  
open music center 18  
orange 5, 9, 34  
outdoor antenna 16  
outlet 8, 9, 11, 18, 34  
5.1 4, 22  
5-speaker 21-24, 26, 28, 34  
factory preset 11, 17  
female-to-female adapter 9  
finish 36  
five-channel 4, 22  
fixed 12-14  
FM 75Ω EXTERNAL antenna 16  
FM ANTENNA 16  
FM antenna 5, 16, 36  
front speaker 5, 6, 8, 10, 34  
C
cable 5-12, 14, 34, 35  
cable box 4, 22  
cable radio 16  
cable TV 12, 16  
Canada 5, 11, 36  
CD 8, 12, 18-20, 23-28, 30, 33-36  
CD changer 4, 20, 24, 26  
CD magazine 5, 20, 24, 25, 33  
center speaker 6, 10, 23, 34  
channel spacing 17, 19  
chimes 21-23  
P
PAUSE 26  
Pause 18  
PCM 4, 12, 22, 24  
phantom 13, 14  
phone numbers 35, 36  
placement 6, 7, 16, 29  
PLAY 20, 26, 35  
Play 18  
PLAY/PAUSE 33  
polarity 35  
port 6, 8  
power cord 5, 11, 18, 34  
power pack 5, 11, 18, 34, 36  
power rating 36  
powered speaker 29, 30, 34  
preset 19, 20, 27  
problems 35  
H
handling CDs 33  
headphones 28, 34  
home theater 6, 13, 12  
house code 17, 18, 19, 30, 32, 35  
cleaning 33  
coaxial cable 12-14  
components 11-15, 28, 34, 35  
connections 9-11, 15, 16, 34, 35  
controls 2, 8, 13, 14, 19-21, 29, 36  
cube speakers 4-6, 9, 36  
customer service 6, 9, 35  
I
IEC-R6 17  
input 12-15, 36  
interference 8, 35  
internal/external 13, 14  
international use 11  
D
damage 5, 24, 35  
dead spots 19, 35  
decoder 4, 12  
L
laserdisc 12-14, 34  
Lifestyle® system CD 5  
line level outputs 12  
PROGRAM 32  
purchase date 3  
digital  
audio input 24  
audio source 4, 24  
bitstreams 22, 24  
signal processing 22  
sound 4, 24  
display 12, 15, 18, 24-28, 31, 32, 34,  
35  
R
M
radio 19, 20, 26, 27, 30, 31, 35  
radio station presets 19  
RANDOM 20, 26  
magazine 24, 25, 34, 35  
magnetic 6, 8  
male phono plugs 9  
manual tuning 27  
AM196575_05_V.pdf  
October 29, 2001  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
weight 36  
random 18, 26  
3-speaker 21, 26, 28, 34  
2 chimes 21-23  
2-speaker 21, 22, 26, 28  
220V 36  
230V 11, 17, 36  
240V 11, 36  
RCA cables 9, 13-15  
RCA connector 10, 12  
RCA connectors 9  
RCA extension cables 9  
red 12, 15  
Z
ZONE 30, 36  
zone 4, 18, 20, 28, 30, 31, 32  
remote control 5, 17, 19-21 28, 30-32,  
34-36  
room acoustics 29  
rubber feet 5, 6, 8  
TAPE 15, 20-23 28, 30, 36  
tape deck 15, 20, 28  
TAPE jacks 28  
tapes 8  
Test CD 5, 18  
S
three chimes 21-23  
tone settings 29  
TREBLE 29  
Troubleshooting 34  
TUNE 19, 26, 27  
tuner 20, 30  
TUNING 27  
tuning 6, 27, 29  
turntable 15  
safety 2  
SAP 13, 14  
satellite 4, 12  
seek 27  
SERIAL DATA 36  
serial number 3, 5  
signal processing technology 29  
signal splitter 16  
simulated surround 23  
SKIP 20, 26, 27  
slot 8, 24  
sound level 4  
sound source 4, 8, 12-14, 18, 28, 30  
SOURCE SELECT 20, 26, 28  
source select 31  
TV 4, 6, 8, 12-16, 34, 35  
two chimes 21-23  
two-channel 22  
U
UK/Singapore 5  
unpack 5  
speaker cable 5, 6, 8, 9, 35  
speaker connections 10  
speaker mode 19, 27  
speaker placement 6, 7, 29  
SPEAKER ZONE 10, 28, 30, 34, 36  
special effect 4, 22  
special features 23  
spill 33  
splice 9  
sprays 33  
stability 6, 8  
standard mode 28  
station frequency 18  
STEREO 21, 23, 26, 28, 35  
stereo 4, 12-14  
stereo cable 5, 12  
STEREO+CENTER 21, 23, 26, 28, 34  
STOP 20, 26, 27  
US 17  
USA/Canada 5, 17, 36  
V
variable 12, 14  
VCR 8, 12, 14, 34, 35  
ventilation 8  
vibration 6  
VIDEO 15, 20, 23, 28, 30, 36  
VIDEO 1 13, 14, 15, 23  
VIDEO 2 13, 15, 22  
video cable 12  
video input 14  
video signal 15  
VIDEO SOUND 36  
video sound 12, 20, 28  
video tapes 8  
Videostage® 4, 12, 22  
voltage 2, 5, 11, 36  
VOLUME 20, 28  
Stop 18  
STORE 27, 32, 33, 34  
SURROUND 21, 23, 24, 26, 28, 34  
surround 4, 5, 7, 9, 10, 12, 24, 34  
surround speaker 5, 10 23, 24,  
surround-encoded 24  
switches 17, 27, 30, 32  
volume 4, 13, 14, 19, 20, 28,  
29, 31, 34  
W
warranty 3, 5, 33, 35  
weak 35  
weak station 27  
T
3 chimes 21-23  
38  
October 29, 2001  
AM196575_05_V.pdf  
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
Bose Corporation  
USA  
Italia  
Bose Corporation, The Mountain  
Bose S.p.A., Via della Magliana 876  
00148 Roma  
Framingham, MA 01701-9168  
1-800-367-4008  
TEL 06-65670802  
FAX 06-65680167  
Phone hours - ET (eastern time):  
Weekdays 8:30 a.m. to 8 p.m.  
Saturdays 9 a.m. to 3 p.m.  
Japan  
Bose K.K., Shibuya YT Building  
28-3 Maruyama-cho  
Canada  
Shibuya-ku, Tokyo 150  
TEL 3-5489-0955  
Bose Ltd., 1-35 East Beaver Creek Road  
Richmond Hill, Ontario L4B 1B3  
1-800-465-2673  
FAX 3-5489-0592  
Nederland  
Phone hours - ET (eastern time):  
Weekdays 9 a.m. to 5 p.m.  
Bose B.V., Nijverheidstraat 8  
1135 GE Edam  
TEL 0299-390111  
FAX 0299-390109  
European Office  
Bose Products B.V., Nijverheidstraat 8  
1135 GE Edam, Nederland  
Norge  
Bose A/S, Solheimsgate 11  
TEL 0299-390111  
FAX 0299-390114  
N-2001, Lillestrøm  
TEL 63-817380  
FAX 63-810819  
Australia  
Bose Australia, Inc., 1 Sorrell Street  
Parramatta, N.S.W. 2150  
Österreich  
Bose Ges.m.b.H., Vienna Business Park  
Wienerbergstrasse 7 (10.OG)  
A-1100 Vienna  
TEL 02 9204-6111  
FAX 02 9204-6122  
Belgique/België  
TEL 01-60404340  
FAX 01-604043423  
Bose N.V., Limesweg 2, B-3700 Tongeren  
TEL 012-390800  
FAX 012-390840  
Schweiz  
Bose AG, Rünenbergerstrasse 13  
Danmark  
4460-Gelterkinden  
TEL 061-9815544  
Bose A/S, Industrivej 7, 2605 Brøndby  
FAX 061-9815502  
TEL 4343-7777  
FAX 4343-7818  
Sverige  
Deutschland  
Bose A/S, JohanneFredsgatan 4  
Bose GmbH, Max-Planck-Straße 36d  
S-43153 Mölndal  
D-61381 Friedrichsdorf  
TEL 31-878850  
FAX 31-274891  
TEL 06172-71040  
FAX 06172-710419  
United Kingdom  
France  
Bose Limited  
Bose S.A., 6, rue Saint Vincent  
78100 Saint Germain en Laye  
1 Ambley Green  
Gillingham Business Park  
Gillingham, Kent ME8 0NJ  
TEL 0870-741-4500 FAX 0870-741-4545  
TEL 01-30616363  
FAX 01-30614105  
India  
From other locations  
Bose Corporation India Private Limited  
W-16, Greater Kailash-II  
Bose Customer Service, 1 New York Ave.  
Framingham, MA 01701-9168 USA  
New Delhi 110 048  
TEL (011) 648 4462 FAX (011) 648 4463  
TEL (508) 766-1900 FAX (508) 766-1919  
Ireland  
World Wide Web  
Bose Corporation  
www.bose.com  
Carrickmacross, Co Monaghan  
TEL 042-9661988  
FAX 042-9661998  
Download from Www.Somanuals.com. All Manuals Search And Download.  
©2001 Bose Corporation  
The Mountain, Framingham, MA 01701-9168 USA  
196575 AM Rev.05 JN20413  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Bose Bluetooth Headset AM347801 User Guide page
Bose DVR RC 18S User Guide page
Bose Speaker System 601 Series III User Guide page
Bose Stereo Amplifier AM262840 page
Bose Stereo System bose wave soundlink adapter User Guide page