SOUNDLINK®
BLUETOOTH® MOBILE SPEAKER II
Owner’s Guide | Brugervejledning | Bedienungsanleitung | Guía de usuario
Notice d’utilisation | Manuale di istruzioni | Felhasználói útmutató | Gebruiksaanwijzing
Podręcznik użytkownika | Guia dos proprietários | Omistajan opas | Bruksanvisningen
Download from Www.Somanuals.com. All Manuals Search And Download.
Tab 8, 16
Tab 7, 15
Tab 6, 14
Tab 5, 13
Tab 4, 12
Tab 3, 11
Tab2, 10
English
SAFETY INFORMATION
• The power supply must be used indoors only. It is neither
designed nor tested for use outdoors, in recreation
vehicles, or on boats.
• Make no modifications to the product or accessories.
Unauthorized alterations may compromise safety,
regulatory compliance, and system performance, and
may void the warranty.
Please read this owner’s guide
Please take the time to follow the instructions in this
owner’s guide carefully. It will help you to properly use your
®
new Bose product and enjoy its features. Please save this
owner’s guide for future reference.
• Where the mains plug or appliance coupler is used as the
disconnect device, such disconnect device shall remain
readily operable.
• Do not place any naked flame sources, such as lighted
candles, on or near the apparatus.
The lightning flash with arrowhead symbol within an
equilateral triangle alerts the user to the presence
of uninsulated, dangerous voltage within the
system enclosure that may be of sufficient
• The battery is only intended for use with the power supply
or charger provided with the speaker. Refer to charging
instructions in the speaker owner’s guide. Do not continue
charging the battery if it does not reach full charge within
the 10 hours. Overcharging may cause the battery to
become hot, rupture, or ignite. If you see any heat defor-
mation or leakage, properly dispose of the battery.
magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle
alerts the user to the presence of important
operating and maintenance instructions in this
owner’s guide.
• Do not attempt to charge the battery in temperatures
outside the range of 32°-104°F (0°-40°C).
• Keep batteries out of the reach of children and pets.
WARNINGS and CAUTIONS
• If the battery begins to leak, do not allow the liquid to
come in contact with your skin or eyes. If contact has been
made, wash the affected area with plenty of water and
seek medical advice immediately.
• To reduce the risk of fire or electric shock, do not expose
this product to rain or moisture. The product shall not be
exposed to dripping or splashing, and objects filled with
liquids, such as vases, shall not be placed on or near the
product. As with any electronic products, use care not to
spill liquids into any part of the product. Liquids can cause
a failure and/or a fire hazard.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
English
Tab 2, 10
Tab 3, 11
Tab4, 12
Tab 5, 13
Tab 6, 14
Tab2, 7, 15
Tab 8, 16
SAFETY INFORMATION
• Do not expose the product or battery to excessive heat,
including direct sunlight or fire and storage or use inside
cars in hot weather, where it can be exposed to tempera-
tures in excess of 140°F (60°C). Doing so may cause the
battery and power supply to generate heat, rupture, or
ignite. Using the product in this manner also may result in
a loss of performance and a shortened life expectancy.
• If the battery is damaged and ignites, do not use water
to extinguish flames. Instead, use a functioning fire
extinguisher.
• Replace the speaker battery only with a genuine
replacement battery from Bose or an authorized Bose
dealer. Bose cannot warrant the safety and compatibility
or assure the operability of batteries from other manufac-
turers for use in operating this product. DO NOT attempt
to use the speaker battery to power other electronics.
Doing so may result in permanent damage to your speaker
and/or personal injury.
• Long-term exposure to loud music may cause hearing
damage. It is best to avoid extreme volume when listening
to audio for extended periods.
• Do not step on, throw, or drop batteries or the power
supply or expose them to a strong shock. Do not pierce,
crush, dent, or deform the batteries or power supply in any
way. If either becomes deformed, properly dispose of it.
This product contains magnets which can be
harmful to pacemaker wearers.
• Do not short-circuit batteries. Avoid storing them around
metal objects such as keys, pocket change, paper clips,
and jewelry.
Please dispose of a used or
damaged battery promptly and
properly, following all local
regulations. Do not incinerate.
• Do not dismantle, open, or shred the battery.
• The battery is intended to be used only with the Bose
product and the power supply provided, or Bose power
supply or charger designed for use with this product.
• This product is intended to be used only with the power
supply provided, or Bose power supply or charger
designed for use with this product.
To return a battery for recycling, contact Bose or your Bose
dealer. In the United States only, call 1-800-905-2180 or
®
regions, see the contact information included in the carton.
This product conforms to all applicable EU Directive
requirements. The complete Declaration of
• The cells in the batteries perform best when operating at
normal room temperature, 70°F (20°C).
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Tab 8, 16
Tab 7, 15
Tab 6, 14
Tab 5, 13
Tab 4, 12
Tab 3, 11
Tab2, 10
English
SAFETY INFORMATION
12. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way: such as power supply cord or
plug is damaged; liquid has been spilled or objects
have fallen into the apparatus; the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
13. To prevent risk of fire or electric shock, avoid
overloading wall outlets, extension cords, or integral
convenience receptacles.
5. Do not use this apparatus near water or moisture.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accor-
14. Do not let objects or liquids enter the product.
15. See product enclosure for safety-related markings.
16. Use proper power sources.
dance with the manufacturer’s instructions.
8. Do not install near any heat sources, such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Only use attachments/accessories specified by the
manufacturer.
10. Protect the power cord from being walked on or
pinched, particularly at plugs, convenience recep-
tacles, and the point where they exit from
the apparatus.
11. Unplug this apparatus during lightning storms or when
unused for long periods of time.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
English
Tab 2, 10
Tab 3, 11
Tab4, 12
Tab 5, 13
Tab 6, 14
Tab2, 7, 15
Tab 8, 16
SAFETY INFORMATION
the equipment off and on, you are encouraged to try to
correct the interference by one or more of the following
measures:
Information about products that
generate electrical noise
This device complies with FCC and Industry Canada RF
radiation exposure limits set forth for general population.
This device must not be co-located or operating in
conjunction with any other antennas or transmitters.
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment to an outlet on a different circuit
than the one to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Any changes to this device not expressly approved by
Bose Corporation may void the user’s authority to operate
this device.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
U.S.A. only
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
this is no guarantee that interference will not occur in a
particular installation.
Canada
This device complies with Industry Canada licence-exempt
RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
This device complies with FCC and Industry Canada RF
radiation exposure limits set forth for general population.
This device must not be collocated or operating in
conjunction with any other antennas or transmitters.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Tab 8, 16
Tab 7, 15
Tab 6, 14
Tab 5, 13
Tab 4, 12
Tab 3, 11
Tab2, 10
English
SAFETY INFORMATION
Please complete and retain for your records
Names and Contents of Toxic or Hazardous Substances or Elements
Toxic or Hazardous Substances and Elements
Serial number
(on the back panel of the product): _______________________
Polybrominated
diphenylether
(PBDE)
Part
Name
Lead Mercury Cadmium Hexavalent Polybrominated
Model number
(Pb)
(Hg)
(Cd)
(CR(VI))
Biphenyl (PBB)
(on the back panel of the product): _______________________
PCBs
X
0
0
0
0
0
Purchase date: ________________________________________
Dealer name: __________________________________________
Metal
parts
X
0
0
0
0
0
Plastic
parts
Dealer phone: _________________________________________
Please keep your sales receipt with this owner’s guide.
0
X
X
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Speakers
Cables
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous
materials for this part is below the limit requirement in SJ/T 11363-2006.
X: Indicates that this toxic or hazardous substance contained in at least one of the
homogeneous materials used for this part is above the limit requirement in SJ/T 11363-2006.
®
The Bluetooth word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc., and any
use of such marks by Bose Corporation is under
license.
Mac is a trademark of Apple Inc., registered in the
U.S. and other countries.
®
Wi-Fi is a registered mark of the Wi-Fi Alliance.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
English
Tab 2, 10
Tab 3, 11
Tab4, 12
Tab 5, 13
Tab 6, 14
Tab2, 7, 15
Tab 8, 16
CONTENTS
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . 8
MAINTENANCE AND CARE . . . . . . . . . . . . . 19
Overview . . . . . . . . . . . . . . . . . . . . . . . . . 8
Unpacking . . . . . . . . . . . . . . . . . . . . . . . 8
Opening the cover . . . . . . . . . . . . . . . . . 9
Placing the speaker . . . . . . . . . . . . . . . 10
Troubleshooting . . . . . . . . . . . . . . . . . . .19
Replacing the battery . . . . . . . . . . . . . .22
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . .23
Contacting customer service . . . . . . . . .23
Limited warranty information . . . . . . . . .23
Technical information . . . . . . . . . . . . . .23
OPERATION. . . . . . . . . . . . . . . . . . . . . . . . . 11
Connecting to AC power . . . . . . . . . . . 11
System status indicators . . . . . . . . . . . 13
Control buttons . . . . . . . . . . . . . . . . . . . 14
Pairing with Bluetooth® devices . . . . . . 14
Adding another source . . . . . . . . . . . . . 16
Operating on battery power . . . . . . . . . 18
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Tab 8, 16
Tab 7, 15
Tab 6, 14
Tab 5, 13
Tab 4, 12
Tab 3, 11
Tab2, 10
English
INTRODUCTION
Overview
Thank you for purchasing the SoundLink®
Bluetooth® Mobile speaker II. Now you can
enjoy your music wirelessly from your
smartphone, tablet, laptop, or other
Bluetooth® enabled device anywhere you
choose.
If any part of the product appears to be
damaged, do not attempt to use it. Contact
your authorized Bose dealer immediately or
call Bose Customer Service. Refer to the
contact list enclosed in the carton for contact
information.
Features
• Wireless Bluetooth link eliminates the need
to dock or physically connect your
Bluetooth device.
• Rechargeable lithium-ion battery provides
®
hours of Bose performance.
• Integrated cover enables easy grab-and-go
mobility.
®
®
SoundLink Bluetooth
Power supply
Mobile speaker II
Unpacking
Carefully unpack the SoundLink® Bluetooth®
Mobile speaker II and power supply. Save the
carton and packing materials in case they are
needed to ship the product.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
English
Tab 2, 10
Tab 3, 11
Tab4, 12
Tab 5, 13
Tab 6, 14
Tab2, 7, 15
Tab 8, 16
INTRODUCTION
1. To open the cover, pull on the fabric tab
Opening the cover
®
imprinted with the Bose logo.
When opened, the cover forms a stand for the
speaker.
• No sound is heard from the speaker unless
the cover is opened.
• When you close the cover, magnets hold it
in place. When closed, the cover protects
the speaker.
• If you close the cover while audio is playing,
the speaker turns itself off.
2. Swing the cover down (a) and fold it under
the unit (b). Magnets hold the folded
sections together.
(a)
(b)
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Tab 8, 16
Tab 7, 15
Tab 6, 14
Tab 5, 13
Tab 4, 12
Tab 3, 11
Tab2, 10
English
INTRODUCTION
• The speaker should not be placed in small
areas that are enclosed on all sides except
the front, as this will adversely affect sound
quality.
• Do not place the speaker on wet or dirty
surfaces. Doing so could transfer dirt, sand,
or moisture onto the speaker when the
cover is closed.
Placing the speaker
When using your SoundLink® Bluetooth®
Mobile speaker II indoors, the tonal quality
can vary depending on where the speaker is
placed in a room. When moving the speaker
around within a room or from room to room,
keep the following guidelines in mind:
• The speaker is designed to sound best
when placed on a shelf, counter, desk, or
tabletop that is 24 to 48 inches high.
If you are using your speaker outdoors, you
should expect the tonal quality to change as
you move farther from the speaker.
• For best bass response, the speaker should
be placed near a wall; bass response
decreases as the speaker is placed closer
to the center of a room.
• When operating the speaker, always use the
cover as a stand. Do not lay the speaker on
its back. Sound is emitted from both the
front and rear of the unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
English
Tab 2, 10
Tab 3, 11
Tab4, 12
Tab 5, 13
Tab 6, 14
Tab2, 7, 15
Tab 8, 16
OPERATION
OR
Connecting to AC power
Before using your new SoundLink® Bluetooth®
Mobile speaker II the first time, you should
connect it to AC (mains) power.
B. Slide the AC adapter for your region
into the power supply.
AC adapter
To connect to AC power:
1. Depending on your region of the world, do
one of the following to prepare your power
pack for use:
Power
pack
A. Unfold the power supply prongs.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Tab 8, 16
Tab 7, 15
Tab 6, 14
Tab 5, 13
Tab 4, 12
Tab 3, 11
Tab2, 10
English
OPERATION
2. Plug the DC power cord on the power
supply into the DC connector on the
SoundLink® Mobile speaker II.
3. Plug the power supply into a live AC
(mains) outlet.
• The speaker emits a tone to confirm the
connection, and charging begins.
• Once connected to AC power, your
SoundLink® Mobile speaker II is ready
for use.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
English
Tab 2, 10
Tab 3, 11
Tab4, 12
Tab 5, 13
Tab 6, 14
Tab2, 7, 15
Tab 8, 16
OPERATION
System status indicators
The speaker is playing the source connected
to the AUX ( ) input.
The status indicators, located on the front of
the SoundLink® Mobile speaker II, illuminate to
indicate when a source or feature is activated.
The Bluetooth® source is selected and
indicates the state of the speaker:
• Slowly fades on-off once per second –
Discoverable and ready to pair with a new
device.
• Blinks on-off twice per second –
Attempting to connect to a paired device.
• Solid on – Connected to a paired device.
• Blinks on-off once every 3 seconds –
Disconnected and available to connect to
any paired device.
For more information, see “Pairing with
®
Bluetooth devices” on page 14.
Indicates the battery level or charging status.
See “Operating on battery power” on
page 18 for more information on reading the
indicator.
Flashes to indicate when the sound is muted.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Tab 8, 16
Tab 7, 15
Tab 6, 14
Tab 5, 13
Tab 4, 12
Tab 3, 11
Tab2, 10
English
OPERATION
Control buttons
• Mutes sound from the speaker.
The control buttons are located on the top of
the speaker.
• Plus (+) increases volume, minus (–)
decreases volume. The front panel source
indicator flashes once for each button press.
The indicator flashes twice when maximum
or minimum volume is reached.
• Press to turn the speaker on or off.
• Press and hold to check the battery level
(see “Checking the battery” on page 18).
• Press to select the source connected to the
(AUX) input. See “Adding another
source” on page 16.
®
Pairing with Bluetooth devices
• Press to select the Bluetooth® source. The
speaker attempts to connect to the last
paired device. See “Pairing with Bluetooth®
devices.”
• Press and hold for 3 seconds to set the
speaker to discoverable mode and allow
pairing with another Bluetooth® device.
• When a device is connected, press to
disconnect the device. The speaker then
waits for a paired device to connect.
• While the Bluetooth® source is selected, if
no device connects within 30 minutes, the
speaker turns itself off.
Pairing occurs when two Bluetooth devices
communicate with each other and establish a
connection. A record of information about this
connection is then stored in the memory of
each device. Once you pair a device with the
SoundLink® Mobile speaker II, you should not
have to pair it again.
The SoundLink® Mobile speaker II can pair
with up to six Bluetooth devices. However, it
can only connect to, and play audio from one
device at a time.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
English
Tab 2, 10
Tab 3, 11
Tab4, 12
Tab 5, 13
Tab 6, 14
Tab2, 7, 15
Tab 8, 16
OPERATION
To begin pairing with a Bluetooth device
Your Bluetooth device indicates when pairing
is complete. The SoundLink® Mobile speaker II
indicates pairing is complete when the
Bluetooth indicator stops fading on and off
and remains steadily on.
1. With the Bluetooth device and the
SoundLink® Mobile speaker II both turned
on, press and hold the Bluetooth button
on the speaker for three seconds to make
the speaker discoverable.
Note: If Bluetooth connection appears to fail, or you
are unable to pair your device, press and hold Mute
on the speaker for 10 seconds until the indicators
The Bluetooth® indicator on the
SoundLink® Mobile speaker II slowly fades
on and off approximately once every
second to show that the speaker is
discoverable.
®
briefly flash. Then press Power to turn the SoundLink
speaker II on again.
To connect a device
2. Set your Bluetooth device to “discover”
the SoundLink® Mobile speaker II, then
locate the Bluetooth device list.
To connect a previously paired device, press
the Bluetooth button on the SoundLink®
Mobile speaker II. The Bluetooth indicator on
the speaker flashes on and off approximately
twice every second until the device connects.
Then the indicator stops flashing and remains
on when the speaker and device have
successfully connected.
3. From the Bluetooth device list, select the
device named “Bose SoundLink.”
4. If your device asks for a passkey, enter
digits 0000 (four zeros) and press OK.
Some devices may also ask you to accept
the connection.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Tab 8, 16
Tab 7, 15
Tab 6, 14
Tab 5, 13
Tab 4, 12
Tab 3, 11
Tab2, 10
English
OPERATION
To pair additional devices
Clearing memory
With the Bluetooth device and the
To clear the SoundLink® Mobile speaker II
memory of all devices, press and hold the
Bluetooth® button on the speaker (about 10
seconds) until you hear a tone.
SoundLink® Mobile speaker II both turned on,
press the Bluetooth button on the speaker for
three seconds to make the speaker
discoverable again. Then follow steps 2 - 4 on
this page.
The SoundLink® Mobile speaker II clears all
Bluetooth devices from its memory and then
becomes discoverable.
The SoundLink® Mobile speaker II memory
can hold up to six paired devices. You can
pair more than six devices, but the memory
will never contain more than six. When the
memory is full with six devices and an
additional device is paired, the least recently
used device is deleted from memory and
replaced by the newly paired device.
Adding another source
You can use another audio device, such as
a portable digital music player, with your
SoundLink® Mobile speaker II. This requires
using an audio cable with a 3.5 mm plug on
one end to connect with the AUX input on the
SoundLink® Mobile speaker II system.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
English
Tab 2, 10
Tab 3, 11
Tab4, 12
Tab 5, 13
Tab 6, 14
Tab2, 7, 15
Tab 8, 16
OPERATION
To add a source:
2. Press the AUX button.
1. Plug the cable from the audio device into
the AUX ( ) connector on the back of the
SoundLink® Mobile speaker II.
3. Adjust the volume on the connected
device to near maximum, then use the
SoundLink® Mobile speaker II volume
buttons to adjust the level.
Note: If a connected device stops playing audio for
30 minutes, the speaker automatically turns off.
Note: The SERVICE connector on the rear of the
®
speaker is for Bose software updates only and will
not play audio from any connected device.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Tab 8, 16
Tab 7, 15
Tab 6, 14
Tab 5, 13
Tab 4, 12
Tab 3, 11
Tab2, 10
English
OPERATION
Charging the battery
Operating on battery power
The battery status indicator on the SoundLink®
Mobile speaker II glows red when the battery
needs charging. The battery can be charged
whether the cover is opened or closed. You can
use the speaker while charging the battery.
A fully charged battery provides approximately
three hours of use at maximum volume. The
rate of battery discharge varies with the volume
setting. You can extend the battery playback
time by reducing the volume.
To charge the battery, connect the power
supply to the speaker and plug it into a live
AC (mains) outlet. The speaker emits a tone
to confirm the power connection. Recom-
mended charging time is 3 hours. The battery
status indicator indicates charging status.
Checking the battery
The battery status indicator is normally off to
conserve battery power. To check the charge
level, press and hold the power button and
observe the battery indicator.
Green: ............. 70% or more of full charge
Yellow: ............ 20% to 70% of full charge
Red: ................ 20% or less (charge needed)
Yellow: .......Battery charging
Green: .......Charging complete
®
Note: Do not store your SoundLink Mobile speaker
Battery protection mode
II for extended periods when the battery status
indicator is red.
When the SoundLink® Mobile speaker II is
unplugged and unused for more than 14
days, it enters battery protection mode to
preserve battery power. To reactivate the
speaker, connect it to AC (mains) power.
See the following section on “Charging the
Battery."
Download from Www.Somanuals.com. All Manuals Search And Download.
18
English
Tab 2, 10
Tab 3, 11
Tab4, 12
Tab 5, 13
Tab 6, 14
Tab2, 7, 15
Tab 8, 16
MAINTENANCE AND CARE
Troubleshooting
Problem
What to do
Speaker will not turn • Make sure your system is connected to a working AC (mains) outlet.
on (AC power)
• Make sure the protective cover is open.
Speaker will not turn • Battery may be in protection mode or discharged – connect to working AC (mains)
on (battery power)
outlet to restore the battery to operational mode.
• Make sure the protective cover is open.
Paired Bluetooth®
device will not
connect
• If your device requires a passkey, make sure the one you entered was correct.
• Turn the SoundLink® Mobile speaker II off and on again.
• Clear the speaker memory (see “Clearing memory” on page 16). Remove the
SoundLink® Mobile speaker II from the list of paired devices on your Bluetooth device
(For help, see the owner’s manual for the device). Then pair the device and the
SoundLink® Mobile speaker II again.
Speaker indicates a
connection, but isnot
playing music
• Turn off or disable Bluetooth on all other paired devices nearby (including Bose®
preferred devices) and reconnect the device you want to hear.
• Turn the SoundLink® Mobile speaker II off and on again.
• Make sure the transport controls of the audio device are set to playback audio.
• Make sure your SoundLink® Mobile speaker II is not muted, and the volume is up.
• Make sure your Bluetooth® enabled device is playing audio, and the volume is up.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Tab 8, 16
Tab 7, 15
Tab 6, 14
Tab 5, 13
Tab 4, 12
Tab 3, 11
Tab2, 10
English
MAINTENANCE AND CARE
Problem
What to do
No audio from a
• Move your Bluetooth device and/or SoundLink® Mobile speaker II away from other
devices that generate electromagnetic interference. Examples are cordless phones,
microwave ovens, wireless network routers, or other Bluetooth devices.
• If possible, turn off all other nearby Bluetooth devices or disable their Bluetooth
functionality.
Bluetooth® device
• Turn the SoundLink® Mobile speaker II off and back on.
• Refer to the owner’s guide, help system, or technical support for your Bluetooth device
to learn how it pairs with other Bluetooth devices.
• Make sure your SoundLink® Mobile speaker II is not muted, and the volume is up.
• Make sure your Bluetooth device is playing audio, and the volume is up.
• Your Bluetooth device may be out of range – try moving it closer to the SoundLink®
Mobile speaker II.
• Turn the SoundLink® Mobile speaker II off and back on.
Cannot pair the
speaker with my
Bluetooth® device
• Make sure your SoundLink® Mobile speaker II is discoverable. Press and hold the
Bluetooth button (three seconds) until the Bluetooth indicator slowly flashes.
• Make sure you select "SoundLink Wireless Mobile speaker II" in the pairing list on your
device to finalize the connection (required by some devices).
• Make sure the Bluetooth capability on your device is turned on.
• Your Bluetooth device may be out of range – try moving it closer to the SoundLink®
Mobile speaker II.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
English
Tab 2, 10
Tab 3, 11
Tab4, 12
Tab 5, 13
Tab 6, 14
Tab2, 7, 15
Tab 8, 16
MAINTENANCE AND CARE
Problem
What to do
Cannot pair the
speaker with my
Bluetooth® device –
cont.
• Reset the SoundLink® Mobile speaker II: Press the mute button for 10 seconds. Your
Bluetooth device is disconnected and the SoundLink® Mobile speaker II turns off.
Then press Power to turn the SoundLink® Mobile speaker II back on.
• Make sure your Bluetooth device supports the A2DP (stereo Bluetooth) profile.
• Make sure when connecting to a PC or Mac computer that you select the SoundLink
Wireless Mobile speaker II as the audio output device within the audio settings menu of
the device. You may need to play an audio track to finalize the connection. (See the
device manufacturer for detailed instructions).
• Check for updated software for your Bluetooth device, or check owners.Bose.com for
®
software updates to the SoundLink Mobile speaker II.
Poor sound quality
from the AUX source
• Reduce the volume level on the AUX source.
• Make sure the 3.5 mm plug is fully inserted into the SoundLink® Mobile speaker II.
Poor sound quality
from a Bluetooth®
device
• Your Bluetooth device may be out of range – try moving it closer to the SoundLink®
Mobile speaker II.
• Move your Bluetooth device and/or SoundLink® Mobile speaker II away from any
device that generates electromagnetic interference, such as another Bluetooth device,
cordless phone, microwave oven, or wireless router.
• Reduce the number of applications running on your Bluetooth device. Running multiple
applications can reduce the amount of internal resources available to transmit audio.
Closing non-essential applications may improve audio quality.
• Try turning off Wi-Fi® to improve audio quality.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Tab 8, 16
Tab 7, 15
Tab 6, 14
Tab 5, 13
Tab 4, 12
Tab 3, 11
Tab2, 10
English
MAINTENANCE AND CARE
Problem
What to do
Poor sound quality
from a Bluetooth®
device – cont.
• Try unpairing your Bluetooth device from the SoundLink® Mobile speaker II and then
re-pairing the two. This action can possibly clear issues that might have occurred
during initial device pairing.
• Turn the SoundLink® Mobile speaker II off and back on.
• Reset the SoundLink® Mobile speaker II: Press the mute button for 10 seconds. Your
Bluetooth device is disconnected and the SoundLink® Mobile speaker II turns off.
Then press Power to turn the SoundLink® Mobile speaker II back on.
• Check for updated software for your Bluetooth device, or check owners.Bose.com for
®
software updates to the SoundLink Mobile speaker II.
No audio from the
AUX source
• Make sure your connected device is on and playing.
• Press the AUX button and check that the AUX source indicator is on.
• Make sure the 3.5 mm plug is fully inserted into the SoundLink® Mobile speaker II.
• Increase the volume level on the device.
• Increase the SoundLink® Mobile speaker II volume.
For replacement batteries, contact the Bose
organization in your country/region.
information in your country or region.
Replacing the battery
The battery should be replaced when:
• The battery status indicator is yellow when
manually checking the battery charge level
following a consistent 10 hour charge cycle.
• The period of battery operation noticeably
decreases.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
English
Tab 2, 10
Tab 3, 11
Tab4, 12
Tab 5, 13
Tab 6, 14
Tab2, 7, 15
Tab 8, 16
MAINTENANCE AND CARE
Please refer to the card for instructions on
how to obtain warranty service and register
your product. Failure to register will not affect
your limited warranty rights.
Cleaning
To clean the exterior surface of your product,
you can wipe it using a soft, dry cloth.
• Do not use solvents, chemicals, or sprays.
• Do not allow liquids to spill or objects to
drop into any openings.
Technical information
Power supply rating
Input: 100 - 240V , 50/60Hz, 600mA
Contacting customer service
Output: 17 VDC, 1A Max
For questions about the SoundLink®
Bluetooth® Mobile speaker II, contact your
local Bose dealer. To contact Bose directly,
see the contact list included with your
SoundLink® Mobile speaker or visit
Input power rating
Input: 17 - 20 VDC, 1A Max
Dimensions
5.1"H x 9.6"W x 1.9"D
(13.0 cm x 24.4 cm x 4.8 cm)
Limited warranty information
Weight
2.9 lb. (1.3 kg)
Your SoundLink® Bluetooth® Mobile speaker II
is covered by a limited warranty. Details of the
limited warranty are provided on the product
registration card that is included in the carton.
Temperature range for use
0° - 45°C (32° - 113°F)
Download from Www.Somanuals.com. All Manuals Search And Download.
23
©2012 Bose Corporation, The Mountain,
Framingham, MA 01701-9168 USA
AM359619 Rev.00
Download from Www.Somanuals.com. All Manuals Search And Download.
|